Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

In January I get to be a yearling.

Posts

In January I get to be a yearling.

#1

In January I get to be a yearling.

David Breth

>Almost everything I'm giving for Christmas this year is something I've turned. Still in my first year, but I'm getting on a pretty good learning curve. Much of the learning I've gained through experience, but a lot has come from this site. Some examples of each, mostly lessons from this site, are below:

wet sanding - learned what it is! Didn't go so well on this cup, but it worked very well on subsequent pieces.

bowls/end grain - learned some great tips for smoothing out the end grain on a bowl. Mostly what I've been doing is putting minwax tung oil in there, and then skewing it and/or sanding it off. Kind of a mix of wet sanding and making the grain stand up. Results are much better. Additionally - if you use paste wax to do this, make sure you turn it all back - because it will show in the finished product if you don't.

Sanding - in spite of the seasonal rush, I've developed patience in sanding. I still find flaws later, and I still have a point where I say "that's good enough", but my finished product has improved dramatically.

There is a lesson in every piece - for me anyway. Whether it explodes and I find myself standing in two hours worth of shavings, or it came out well, I can always think of something I wish had gone better, something I might have been more patient with, a sanding scratch that I need to pay more attention to next time, etc.

Hollowing end grain cups - great tips about tool rest placement, drilling to depth before you start, tool selection

Glueing - made a bank. Technically I glued the piece together incorrectly, but it held. Now I know for next time how to handle that.

finishing - used spray lacquer to finish stickpens that had rub-on decorations, and a small box that had rub-on decorations. Learned something very valuable - read the instructions. Just because I think materials are compatible does not mean they are.

planning - plan your sessions, or at least have something in mind that you want to do when you hit the shop door.

Protection - while I am still saving pennies for proper dust collection, I think my favorite aquisition this year is the north 7700 that I bought as a direct result of this site. I started wearing a cannister mask a few years ago when I realized I was getting sinus infections a few times a year that were attributable to sawdust. Didn't realize the harm of the stuff short term or long term. So I woke up, but the mask I had wasn't that good. Still had to clean sawdust out that snuck underneath. No more.

Using a light touch with the tools - It is remarkable how much you can accomplish with a sharp tool barely in contact with the wood in the way of taking out end grain and keeping the piece round.

safety - I realized early on reading on this site that a facemask is essential. I did not fully appreciate the dangers of the lathe until a few people posted their mistakes. I did not realize how easy it is to hurt yourself until I grazed my forearm on a spinning talon and got no pain but a hell of a bruise the next day. I have a lot more respect for the machine, and it takes a conscious effort not to get complacent.

If I keep thinking about this, I'll think of more and more, but I guess what it really amounts to is I want to thank the myriad people who have responded to my many questions this year. This hobby is enjoyable for a number of reasons, and very high on that list is that unlike almost any other hobby I have participated in, the kindred spirit is so giving of time, knowledge, materials, etc. I have not encountered anyone who held back a tip for themselves, or who wouldn't let you borrow a cup of wood if they had it to spare. I'm looking forward to my first anniversary on the lathe in January.

David B.

Re: In January I get to be a yearling.

#2

That is what we like to hear

TD

>David, if we prevent one injury then it is all worth it. I am glad to see you growing in your turning ability and your concerns for your personal safety. Have fun in the coming year! and thanks for posting.

TD

Re: In January I get to be a yearling.

#3

Re: In January I get to be a yearling.

George Fitzpatrick - Springfield MA

>I don't become a yearling till April :)

But I heartily agree with you in all you said. And an addition...

Patience....now, when I make a mistake, or have to toss a piece I have worked on into the firewood pile, it doesn't bother me nearly as much as before. Now, I can recognize that I am learning something with each piece, so if I wreck something, it still has been a valuable learning experience. Funny, the patience thing has also extended into other areas of my life, too. Maybe I'm just finally slowing down! :)

Can't emphasize safety enough. Last night while turning a piece, I got a major catch while hollowing. The piece flew off the lathe, and because of all the safety tips learned here about positioning, face shields, etc., the only thing I had to do was remount it. If that had happened last May, I would have at least a couple black eyes right now!!

Re: In January I get to be a yearling.

#4

Re: In January I get to be a yearling.

Carole in VA

>I couldn't have said it better. I will be a yearling in March. Well, I guess actually it was last week a year ago, since that's when I got my Mini, but I only turned a few pens in the beginning. I consider my first bowl in March to be the beginning of my addiction. If it hadn't been for WC, I never would have even had a lathe, much less be turning bowls and hollow forms now. Think I will go turn a couple of pens for old time's sake. ;)

Re: In January I get to be a yearling.

#5

Re: In January I get to be a yearling.

Don O.

>An early Happy Anniversary David ! Your post combined with Colin's are excellent commentary for a safe, fun and satisfying year of learning this obsession. I don't often post or even respond, but felt compelled to say a big thanks to everyone here for all the advice and help I have recieved just from lurking here. This is an amazing site and you are right about turners being so giving and sharing.

So, thanks everyone for giving so much of your knowledge and time. I wish you all the best for this Holiday Season (there are several over the next few weeks) and continued good fortune for the upcoming year and beyond.