Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Micro Cartridge

Posts

Micro Cartridge

#1

Micro Cartridge

Norm Smith in Nova Scotia

>I get dust coming out through the bag of my 2 hp. dust collector. I tried different bags but cannot correct the problem. I am looking at a 1 Micron Cartridge filter that will fit my collector replacing the bad. Anybody have any good or bad expierence with these cartridges??

Any help in pointing me in the right directon would be appreciated.

Norm

Re: Micro Cartridge

#2

Re: Micro Cartridge *LINK*

Gary Ratajczak

>I have a Jet DC1200, and purchased a filter from the source shown below. Does a GREAT job. One drawback is that fine dust will clog the filter pretty quick. I just blow off with compressed air a few times a month, and back in business. No buildup of dust around the filter, collector etc. - not much escaping. I have been thinking about adding a cyclone, so that should keep much of the dust / debris from making it into the collector. These guy's are very knowledgable, and I found the pricing can't be beat. I need to finish piping in 6" also to increase the airflow. 4" starves this collector for air. A++++ additiona to a collector. I had a small import roll around prior to the Jet - even did a great job on that unit.


http://www.wynnenv.com/cartridge_filters.htm

Re: Micro Cartridge

#3

Re: Micro Cartridge

JamieDonaldson

>Norm- my experience is similar to Gary's- this summer I installed a JDS collector with cleanable cartridge and I am well satisfied with the improvement over the old Delta roller unit with the leaky bag.

Re: Micro Cartridge

#4

JL

Re: Micro Cartridge *LINK*

JL

>An alternative would be to get a felted bag like they sell at Highland Hardware. They do work better than the ordinary bags.


Felted Bag from HH

Re: Micro Cartridge

#5

Re: Micro Cartridge

Gary Ratajczak

>I originally went that exact route. One my small collector, it originally came with fabric bags - you could see the dust come out!!! Went to a set of felt bags from Penn State. A film of dust would still develop on the outside of the bags, and be released whenever collector was started. Pleated filter - no sign of any dust whatsoever. So, for me, the difference from a $30.00 bag to a $90.00 cartridge was well worth the few dollars difference. Also, the bags end up getting a coating on the inside that you can never seem to fully get off. I have been removing the filter for over a year, and removed it a short time ago to have a look - no buildup at all. As mentioned, I only hit with a blast of air a few times a month.

Experiences may vary - that's mine :-)

Re: Micro Cartridge

#6

Re: Micro Cartridge

Vicmarc.fan

>I have a 2HP Woodtek and went the same route as Gary. Felt bags, better felt bags and now a Penn State 1 micron canister cartridge on top, clear plastic bag on the bottom. Works so well I no longer want a cyclone. Now my big problem is remembering to hang onto the paper towell or it is gone.

Ron

Re: Micro Cartridge

#7

Re: Micro Cartridge

Gary Ratajczak

>I believe mine is a .5 micron. i do the same - 55 gal plastic bag on the bottom. GREAT to clean - pop off the bottom, and toss the bag.

Re: Micro Cartridge

#8

Re: Micro Cartridge

Norm Smith in Nova Scotia

>Thanks everyone. I now know my options.

Norm