Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Table legs needed

Posts

Table legs needed

#1

Table legs needed

Marty - Plainfield, IL

>It was suggested that I post over here.

I need four legs for a christmas present. Below are the details. The design below is perfect for this project. It figures that I get a call today from the company telling me their out of stock. Pretty much no chance of getting them before x-mas. Let alone finishing the project.

I have tried all the major sites I can find and found similar legs, but most would need modifications (too tall) to work.

Has to be maple. Should be 18" tall.

http://tablelegs.com/sheratontablelegs.htm#304new


Stretcher Block Coffee

This versatile leg will give your project visual interest at the floor. Use the stretcher block to support an H-stretcher, a box stretcher or even a handy shelf. Recommended top thickness is 3/4" with about a 3" overhang.

Available as a Table Base Kit Dim.: 18" H x 2 1/4", 5" upper post, 3" lower post 2 1/2" from floor

Edit/Delete Message

Re: Table legs needed

#2

Re: Table legs needed

Ron in Drums PA

>Try

www.tablelegs.com

Re: Table legs needed

#3

Opps!

Ron in Drums PA

>I should read a little closer

Re: Table legs needed

#4

Re: Table legs needed

Darryl Hansen

>I found some similar to those at Lowes. don't remember if they were maple or not though..

Re: Table legs needed

#5

Steven Antonucci

Try these guys  *LINK*

steve antonucci

>


osborne