Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Finish over stain

Posts

Finish over stain

#1

Finish over stain

Oscar

>I appreciate some advice on how to finish a bowl. The bowl is made of maple and has a textured stained (minwax walnut) band running around it. My normal method would be to use Danish Oil. I'm concerned the stain will run into the natural colored wood. My only thought is to spray with lacquer and I'd prefer not to use it. Thanks for any help. Oscar

Re: Finish over stain

#2

Re: Finish over stain

oscar

>Help...

Re: Finish over stain

#3

Re: Finish over stain

Brian Hahn in SW Wisconsin

>Once the stain has dried/cured it should be safe to use almost any finish on top of it, including Danish Oil. If you're really worried you could seal just the stained area with a real thin coat of shellac - a 1 lb cut would be more than enough.

Re: Finish over stain

#4

p.s.

Brian Hahn in SW Wisconsin

>It has been decades since I used Minwax stains, but back then they were pigmented stains. As far as I know, they still are. Pigments don't bleed or run. The stain vehicle contains a binder to keep them in place. Once that binder cures, the pigment is locked onto the surface. The only danger I've encountered is smudging while the stain is still wet.

Re: Finish over stain

#5

Re: p.s.

Oscar

>Thank you Brian, I appreciate your help. Oscar