Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Oneway 2436 auction?

Posts

Oneway 2436 auction?

#1

Oneway 2436 auction?

Gary in Zirconia, NC

>I was wondering how much those 2436's went for? Al, you got the prices?

Re: Oneway 2436 auction?

#3

Re: Oneway 2436 auction?

John Lucas

>Kkurt That's why I no longer go to auctions around here. I've seen Harbour Freight tools sell for the price of a craftsman tool. No way I'm bidding on that. I've been trying to by a bicycle roller off EBAY for several months now. They are going for just slightly under retail. If I'm going to an Auction I either want something rare that you can't find or I want a deal.

Re: Oneway 2436 auction?

#4

Re: Oneway 2436 auction?

Duane C.Leach

>Hi all.-- Al Crandall and I went to this auction together. It was a worth while trip just to speek with many old friends and make a few new ones.

Most of the tools and equipment was in like new or new condition. A few tools were still in the unopened plastic wrapper. Some of the power equipment had never been used. Why would a turner need 8 grinders and two Tormech systems with any and all accessories. As for the price that some of the woodworking equipment brought. Some tools sold as low as 20% of new price and some sold for 10% to 20% above new price. If you new what new price was you could have gotten many good deals because the seller had several of everything, four lathes,8 or 10 grinders, 15 to 20 routers,2 dust collecters,3 dust filters, the list went on and on.

Wish you had been there.

Duane

Re: Oneway 2436 auction?

#5

Re: You asked for it.

Al Crandall (NE of Indy)

>I wrote down several of the prices of items just for grins. A 2002 2436 3 h.p. Oneway which had never had the belt run on the pulleys, as far as we could tell, went for $6100. It had the 17" bed extension mounted on the right end, and the outboard turning set up for the left end. I'm pretty sure that the long Vega duplicator which was sitting on the floor at the end of the lathe went with it for the same money, as did a large compliment of small accessories like extra faceplates and scroll chucks.

The other 2436 lathe was a 2000 model with the 2 h.p. motor and the 17" bed extension on the right end of the lathe. It showed only the slightest signs of having ever been used and also had a lot of extra accessories. It went for $4750. My gut feeling is that this one will show up on ebay in short order. It was no secret that several of the bidders were stocking their ebay stores at this auction.

There were two Oneway 1018 lathes which had seen use, but not very much, and there was no way of determining the model year on them. Scroll chucks, faceplates, live centers, penturning mandrels, lathe stands,yadda yadda yadda went with them. One of them had a vega duplicator with it, and it went for $1300, while the one without the duplicator was $1200.

There were two deep boring bar handles from Jameison with the 3/4" and the 1 1/8" bars attached and one secondary rest or "trap". Each "D" handle had the laser accessory attached, and the whole works went for $260.

There were several different bench grinders on stands, (two of them were the big Delta grinders), and three of them had Wolverine sharpening systems attached. A fourth grinder just had the Wolverine system with Varigrind attachment, still in the boxes, sitting on the base of the stand.

Noticeably absent from his arsenal of tools were the jumbo jaws for any of the chucks, or also any portion of a vacuum chucking system.

A legacy ornamental mill/lathe with large router sold for $1150. A slightly used Tormek grinder with all the jigs and and an extra new 10" wheel was $500. A totally new Tormek Super Grind System with all attachments was $565.

My only purchase was a Powercrafter 400,000 rpm turbine grinder and a Treeline filter/regulator with gage and toggle on-off switch for $125.

Re: Oneway 2436 auction?

#6

Thanks for the info. Al

Gary in Zirconia, NC

>