Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Glueless in Durham

Posts

Glueless in Durham

#1

Glueless in Durham

Bill L.

>Having stored CA glue in the refrigerator in between turning sessions , I thought nothing of leaving a 2 ounce bottle of thick superglue in my workshed for the past 2 nights . Well , it dipped below freezing and the glue appears to have irreversibly changed its viscosity to thin . The glue was allowed to warm up to room temperature ; and 24 hours later it still flows like water ! Is there any way of " fluffing" up this almost full bottle , or should I get a permanent marker and replace 'ck' with a big "N" ? I sure miss it for laminating up small bowls . Bill L.

Re: Glueless in Durham

#2

Re: Glueless in Durham

eaglesc

>I keep my open bottles outside all the time and even with the recent cold weather they are just fine.

What seems odd is that it thinned rather than thickened.

Re: Glueless in Durham

#3

Re: Glueless in Durham

Sam Dean

>Same here. Mine always stay outside, all year in an un heated shop, with no problems?!?

Sam

Re: Glueless in Durham

#4

Re: Glueless in Durham

Steve in Durham

>Are you glueless in Durham, NC?

Re: Glueless in Durham

#5

Ric Taylor

Re: Glueless in Durham

Ric Taylor

>I've been using superglue for 30 years in all kinds of conditions, from extreme heat to extreme cold (well below freezing), and I've never heard of this happening.

Ric

Re: Glueless in Durham

#6

Re: Glueless in Durham

Bill L.

>Thanks for the input on the CA glue . I'm a little red-faced at the moment. This afternoon I discovered the glue was back to normal so it was back to the lathe . This is the first this Turner has used thick CA in cold weather - with a change of viscosity . Yep , Steve , it's Durham,N.C.