Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Lesson learned, I think. (buffing)

Posts

Lesson learned, I think. (buffing)

#1

Lesson learned, I think. (buffing)

Barry Irby

>I have the Bealle buffing system and generally like it. I got the idea that if you buffed before you put the finish on it might be even better. About two or three weeks ago I buffed a cherry bowl, tripoli and White diamond, (Not the Carnuba) and sprayed it with Deft gloss lacquer. Several coats. Let it cure for at least two weeks. Tonight I buffed it again. Or at least I tried. The finish came off almost like removing a piece of shrink wrap. At least about 95% of it did. What a mess. The rest hung on as if it had been baked on. Re sanded the bowl and started over. I won't be trying that again.

Re: Lesson learned, I think. (buffing)

#2

Re: Lesson learned, I think. (buffing)

Juergen

>Sounds like you case hardened the surface. When you applied a non penetrating finish, it was not able to bond properly. I've used the same sequence except I used a penetrating finish (WATCO) with no problem.

A benefit of buffing before applying the finishing, especially with porous woods, is fewer coats are required to build a glossy finish.

Re: Lesson learned, I think. (buffing)

#3

Re: Lesson learned, I think. (buffing)

Russell L. Babbitt Jr.

>Check the Beall website I believe they recommend some kind of an oil finish before buffing. I have done a little of everything. Oil, lacquer, wax and then buffed. I feel it improves everything I do. I makes the pieces feel great and even help remove minor sanding marks. Some club members do not use the tripoli on light colored woods because they feel it collects in the grain. I find this true on open grain woods like oak, but not on the finer grained woods with a good finish that has sealed the pores. For all our new members I almost recommend the Beall as a necessary tool.....

Re: Lesson learned, I think. (buffing)

#4

Re: Lesson learned, I think. (buffing)

RussFairfield

>The White Diamond has a wax carrier for the abrasive, and there will be a thin film of hard carnauba wax remaining on the surface of the wood after buffing. Spraying a lacquer over a coating of wax doesn't always work.

You should always remove the wax by cleaning the wood with lacquer thinner, or wiping off the first coat of lacquer before it has a chance to dry. There should be no problem if you do this.

Re: Lesson learned, I think. (buffing)

#5

Re: Lesson learned, I think. (buffing)

John Lucas

>Russ is dead on although I don't know the contents of the beal sticks. What I do know is that I have refinished many bowls, and pieces of furniture for people. It didn't take long to figure out that I had to remove whatever form of wax they used to make it look better. this could have been spray on wax like people use on furniture or wipe on hiqh quality wax. I got in the habit of cleaning everything with Mineral spirits before I started the cleaning refinishing process because this solved all of my finishing problems.

Re: Lesson learned, I think. (buffing)

#6

Thanks!

Barry Irby

>If I try this again I will definitely clean off the wax. Thanks again, always something to be learned here.