Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

flooring cut nails

Posts

flooring cut nails

#1

flooring cut nails

Lan Brady

>I just bought a box of flooring cut nails. I was unable to drill a hole in it. Are these hardened steel?

Lan

Re: flooring cut nails

#2

Re: flooring cut nails

Brian Hahn in SW Wisconsin

>They used to be and sounds like they still are.

Back 20 or 30 years ago, before they came out with round concrete nails, cut nails where what we used to nail into concrete. Plenty hard, but kind of brittle - snapped more than one with a poor hammer blow. They were hard enough to dent the face of the hammer. I've still got some small carving tools I made from cut nails.

Re: flooring cut nails

#3

Re: flooring cut nails

John Lucas

>They most definitely are. I use them in my tool making demos. Heat them cherry red and let them cool slowly and then you will be able to drill them.

Re: flooring cut nails

#4

Re: flooring cut nails-Thanks

Lan Brady

>John,

Thanks, it never ocurred to me that they would be hardened. I thought my all my drill bits were dull at once.

Now, I can drill the holes plus a new source for metal to make tool. What tools do you make in the demo?

Thanks, Lan

Re: flooring cut nails

#5

Re: flooring cut nails-Thanks

John Lucas

>When I use the cut nails I usually make either miniature hollowing tools or hook tools. Mostly I like them because I can break one, anneal it and bend it, then harden it and break it. It makes it very clear how the heat works. Usually now I just do the heat demo with the nails and then I use a piece of drill rod to make an ornament hollowing tool.

Re: flooring cut nails

#6

Traveling celebrity

JKJ in East TN

>Hey Sir Lucas, would you come back and give that demo to Smoky Mtn Woodturners this spring/summer? I learned a lot from your skew chisel/hand mirror demo.

JKJ