Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Turning oak

Posts

Turning oak

#1

Turning oak

George Fitzpatrick - Springfield MA

>Is oak harder to turn than most other woods? I was recently given some large pieces of oak (been laying around outside for several months), and find that I'm having a lot of difficulty turning it. Maybe my tools are not sharp enough? I have turned maple, birch, cherry, pine and purpleheart without trouble, but the oak seems to be giving me fits. Any input??

geofitz13

maker of fine sawdust

Re: Turning oak

#2

Re: Turning oak

Mark Mandell - Gone Round In Jersey

>Turned some when I had nothing better (see pic - oil poly finish). Not something I want to make a career doing. One suggestion that I got that I'll pass along is keep a spray bottle of water handy. Got to the point that I was in the routine of Spray-n-Cut, spray-n-cut. Did make a big difference.

Yes, tools need to be sharpened often.

Mark


img

Re: Turning oak

#3

Re: Turning oak

GaryG in MD

>George,

Oak turns ok. I learned turning on it (for better or worse). It's much more difficult to return the dried roughouts than the green wood.

Sand carefully with a block, or you'll get waves, as the grain pattern sands out preferentially.

You can "stain" it darker by exposing it to ammonia fumes or by wetting it with vinegar which has had steel wool soaked in it overnight.

A word to the wise: clean your lathe bed and tools carefully after turning oak! If you don't, it will stain and/or corrode them. DAMHIK!

You can find some nice grain, some interesting burls, and it will spalt if you leave it laying around outside in the dirt for a few months.

Have fun with it,

Gary

Re: Turning oak

#4

Another addition

Jay in TX

>Yes, by all means clean up all shavings, chips, and dust off of metal after using wet/green/unseasoned oak. In addition, if you don't already, clean and wax your metal surfaces (lathe bed and other tooltops and such nearby) to add a preventative measure. Oak is not my prefered victim, but I rarely pass up an available large crotch, even if it is oak.

Jay Kilpatrick... (tmDS) searching for the elusive mesquite near Fort Worth, Tx