Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

fire extinguisher follow-up

Posts

fire extinguisher follow-up

#1

fire extinguisher follow-up

JKJ in East TN

>I reviewed my fire extinguisher needs after reading about the shop fire disaster yesterday. I have six extinguishers in various places including the cars, but most are too small for the space and while they all still had good pressure, some were quite dated. My largest extinguisher was dated 1986. Pressure should be checked monthly. I probably didn't check it more than once a year, if that.

I did some quick research: fire extinguishers should be serviced every six years and hydro tested every 12 years. Without service (recharging), even with proper pressure the powder used in most extinguishers may become hardened or caked and the extinguisher may not function properly when needed. Nothing like the extinguisher failing to work the one and only time you absolutely have to have it.

Most of mine are also cheap extinguishers with plastic valves. These are the consumer models usually sold in Home Depot, etc. I understand that service companies cannot service these and consider them disposable. I also found references on the web to plastic valves degrading over time and cracking, slowly bleeding the pressure.

I visited a local fire extinguisher company and found quality reconditioned industrial fire extinguishers are reasonably priced. I picked up two 10ABC for $45 each and one 20ABC for $65.

JKJ

Re: fire extinguisher follow-up

#2

used extinquishers

TD

>JK, I had some extinquishers re-tested and re-charged; cost was pretty high compared to buying new ones but it saved me a few bucks, I thought. A few months later I checked them and found that they had lost pressure. After that I started buying the 2 packs at Sam's Club except for the CO2 extinquisher. A big CO2 will put out most fires if caught quickly but after that a class 10 is best. I learned in the Navy fire fighting school to aim the class 10 at the base of the flames (at the fuel, not the flames). But more importantly, we should all be vigilant in preventing the fires rather than having to fioght them. Oily rags, accumulating dust (especially on motors), using flammables inside a heated shop, etc. we know to watch for but we also have to worry about mice moving indoors for the winter and chewing electrical wiring. My son is a firefighter so he is always pestering me about my extension cords but I argue that as long as I use 12 gauge cords I am OK. Smaller cords will not trip the 20 amp breakers but will burn instead so no shop should have any 16 gauge extension cords (my opinion). Are there any other things to watch for?

Re: fire extinguisher follow-up

#3

Re: used extinquishers

JKJ in East TN

>>I had some extinquishers re-tested and re-charged;

>cost was pretty high ... A few months later I

>checked them and found that they had lost pressure.

The company I bought from gets $14 to recharge a 10ABC extinguisher. They guarantee the pressure for one year, same as a typical warranty when buying new.

JKJ

Re: fire extinguisher follow-up

#4

Re: used extinquishers

JKJ in East TN

>>Are there any other things to watch for?

Combustibles near hot light bulbs.

Dust in power outlets.

Power cord damage or deterioration.

Power plug discoloration on prongs (indication of resistance/heat).

Accidental or intentional sparks from grinding or cutting metal.

Smokers.

Re: fire extinguisher follow-up

#5

Re: fire extinguisher follow-up

Ron in Drums PA

>Our local Fire Dept does a fund raiser once a year by offering to recharge fire extinguishers. Thier price is about 75% of what it normally cost to recharge elsewhere.

Check with your FD if they don't do this they can point you to a good scoure

Re: fire extinguisher follow-up

#6

Re: fire extinguisher follow-up

Nick Tuzzolino

>In addition to the need for Class B and Class C extinguishers, you cannot beat a permanently attached garden hose close by. This provides an endless water supply. By permanent I mean wrench tight at the bib and wrench tight on the nozzle(so nobody can easily remove for another purpose). This is a legal Class "A" extinguisher where required in the City of Los Angeles, and I'm sure many other localities.

Re: fire extinguisher follow-up

#7

Re: fire extinguisher follow-up

Bill Crommett

>Having once had to use a puple powder extinguisher in the kitchen, I vowed I would never want to clean up a mess like that again. So I bought a couple of CO2 extinguishers for a couple of hundred dollars, and have never regretted the purchase.