Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Sorry to bother you; but, help?

Posts

Sorry to bother you; but, help?

#1

Sorry to bother you; but, help?

Ruth NIles

>I do apologize but I've just spent 20 minutes trying to search the archives for information about soaking Norfolk Island Pine bowls. I know there have been many postings on this subject but I just don't know how to bring them up. I checked "the past year", "all" of these words, then tried 198 variations of NIP, soaking mixture, translucent, homebrew, home brew, etc. etc. I keep getting "0 results for your search"...........I know I'm doing something wrong.

HELP! I have 2 chunks of NIP, can't afford enough Danish Oil, some of you (Russ included, I believe) have posted your own mix to achieve the same results and I can't find them. aaarrrrgggghhhh

Thank you for your kind patience and responses.

Very Sincerely Yours,

Ruth Niles

(had a formal moment there)

Re: Sorry to bother you; but, help?

#2

Re: Sorry to bother you; but, help?

TD

>Ruth, try using a homebrew of Boiled Linseed Oil and Turpentine, half and half, and a dash of japan drier. You might want to add some varnish too but this is optional. You can substitute Mineral Spirits for the Turp. All this is from memory and I do not turn NIP so if someone suggests something better.........

Re: Sorry to bother you; but, help?

#3

Re: Sorry to bother you; but, help?

Ed in Leaside

>Are you searching the current board(last 2 weeks) or the Turning Archives (menu in the left frame)? I seached the archives for "NIP" in the last 5 years and got 183 hits.

Re: Sorry to bother you; but, help?

#4

Re: Sorry to bother you; but, help?

John Lucas

>Ruth I don't have time to look it up because I have a photo assignment in a couple of minutes but do a search for Ron Kent. He soaks his bowls in oil. Don't know if that's what you wanted to do but his sure look fantastic.

Re: Sorry to bother you; but, help?

#5

ron Kent *LINK*

John Lucas

>Try this Ruth. My assingment is late so I had time to find this.


http://www.ronkent.com/RKhome.html

Re: Sorry to bother you; but, help?

#6

Re: Sorry to bother you; but, help?

Don O.

>Hi Ruth, maybe check over on WOW. There was a recent discussion about this very subject. I think Kelly Dunn gave a very detailed description of the process. Good luck and show us how it comes out.

Re: Sorry to bother you; but, help?

#7

Re: Sorry to bother you; but, help?

Ruth NIles

>Ed,

I did the search in "Turning" archives for the past 1 year. I know you got 183 hits but there are 180 posts that just have the words Norfolk Island Pine and I just wanted to know the mix to soak the wood in to make it translucent.

Thanks for the assist.

Re: Sorry to bother you; but, help?

#8

Re: ron Kent

Ruth NIles

>Thank you for taking the time to get this link, John. Ron does a beautiful job with the NIP and (sort of) relates his technique but not what he soaks them in other than saying "oil".

Hope all is well with you and hope you find that "perfect woman"! See if she knows the "perfect man" for me. ; )

Ruth

Re: Sorry to bother you; but, help?

#9

Re: Sorry to bother you; but, help?

Ruth NIles

>Thanks, TD, that's what I was looking for. I'll try it and post a picture, IF the piece comes out good.

Re: Sorry to bother you; but, help?

#10

Re: Sorry to bother you; but, help?

RussFairfield

>I use a mixture of

2-gallons Mineral Spirits (Odorless because it smells better)

1-gallon Boiled Linseed Oil

1-quart McCloskey's gloss Spar Varnish (red can)

1/2 pint Japan Drier only if the shop temp gets below 55F at night

Turn the wood wet and keep it that way, to final thickness of 3/16" or less, and sand from 60 thru 150 grits. No higher because the finer grit reduces penetration of the finish. Throw it into a bucket of finish, use a brick to hold it down, cover the surface with Saranwrap, and leave it there for a couple weeks. Remove and drip dry for another couple weeks. Then wet sand through whatever grit you want.

For larger pieces that won't fit in the bucket, I keep it saturated and wrapped with Saranwrap so the oil doesn;t dry. Unwrap and reapply the oil daily for the same 2 weeks, and then let it dry for 2-weeks.

It should look like this when you put a light inside.


img

Re: Sorry to bother you; but, help?

#11

Re: NIP process I did *LINK*

Ben Aragon

>Ruth,

Here is a link to threads I posted about NIP.

I hope this helps.

Ben

http://www.woodcentral.com/cgi-bin/archives_turning.pl?read=73196

http://www.woodcentral.com/cgi-bin/archives_turning.pl?read=74299


NIP PROCESS

Re: Sorry to bother you; but, help?

#12

Re: Sorry to bother you; but, help?

Don Tewell

>Gorgeous bowl. Great work.

Re: Sorry to bother you; but, help?

#13

I Just Might Try That Mix To Soak Cottonwood

Barbara Gill, Remlik VA

>

Re: Sorry to bother you; but, help?

#14

Thank You, Russ

Ruth NIles

>I was hoping you'd respond, Russ. That is a very impressive piece you turned, I hope I can turn something that nice from the wood I have.

Thanks for the recipe!

Ruth