Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Winged Natural Edge Hard Maple

Posts

Winged Natural Edge Hard Maple

#1

Winged Natural Edge Hard Maple

Jim Ketron

>This is the second of the natural edge winged bowl series that I'm working on.

This one has lots more curl than the last and is a little larger.

It measures 13 1/2" X 3 1/2" tall and the bowl part is 6 1/4". Finish is Gel Poly and buffed on the beall.


img

Re: Winged Natural Edge Hard Maple

#2

Re: Winged Natural Edge Hard Maple

George Van in WI

>Very nice bowl Jim, off center, natural edge, good figure and finish. Was this a healed over branch scar?

Re: Winged Natural Edge Hard Maple

#3

Re: Winged Natural Edge Hard Maple

Steve in NC

>Very nice bowl. Can you post a photo of the bottom. How did you hold it on the lathe.

Re: Winged Natural Edge Hard Maple

#4

Oyster?

Thomas Skaggs, Foothills of Mount Level

>Wow, that is cool! It sort of looks like an oyster! Very nice!

Tommy

Re: Winged Natural Edge Hard Maple

#5

Re: Winged Natural Edge Hard Maple

Jim Ketron

>Yes it was, I call them poor mans limb burls! its hard to find them where the bottom of the bowl will have enough to work with.

Re: Winged Natural Edge Hard Maple

#6

Re: Winged Natural Edge Hard Maple

Jim Ketron

>Here ya Go! I used a tennon and finished off the bottom with the vac.


img

Re: Winged Natural Edge Hard Maple

#7

Re: Winged Natural Edge Hard Maple

Ed Kelle

>I definitely like this a lot. Great job Jim!

Re: Winged Natural Edge Hard Maple

#8

Re: Winged Natural Edge Hard Maple

TomW in SouthJersey

>Very nice. The finish is very impressive because it looks so natural.

Re: Winged Natural Edge Hard Maple

#9

Re: Winged Natural Edge Hard Maple

Steve in NC

>Very nice. Thanks for the additional info. I am afraid that if I tried to turn something this off center on my lathe it would vibrate out the door. (With the door still closed)

Thanks again for the post.