Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

closs-quarters drill

Posts

closs-quarters drill

#1

closs-quarters drill

olejon10

>i am looking to buy adrill to sand bowls looking at the sioux 8000es 3/8 variable speed and the 0375-6 milwaukee 3/8 inch close quarter can anyone tell me any thing about them weres the best place to buy them thank you

Re: closs-quarters drill

#2

Re: closs-quarters drill

Ken George

>Tool King has a reconditioned Milwaukee close quarter drill on sale for $69.88. Here is a link: http://www.toolking.com/productinfo.aspx?productid=611

Re: closs-quarters drill

#3

closs-quarters drill ebay purchase

DougJ in Crawfordsville, IN

>I bought one of those cheap ones from ebay,,, so far so good.

Re: closs-quarters drill

#4

Re: closs-quarters drill ebay purchase

R Grady

>I bought one yesterday on overstock.com for 39.99. Looks just like thew Milwaukee

Re: closs-quarters drill

#5

Re: closs-quarters drill ebay purchase

Dick Parr

>Here is the link.

http://www.overstock.com/cgi-bin/d2.cgi?page=proframe&prod_id=1529930

Dick

Re: closs-quarters drill

#6

looks like Milwaukee but isn't

Darryl Hansen

>The Milwaukee and Souix drills do not have that little balck tab on the cord near the handle.

Re: closs-quarters drill

#7

Re: closs-quarters drill ebay purchase

Paul in Phoenix, AZ

>For $39.95, if it breaks, just throw it away and buy a new one. Or you could buy one for each grit you use and they would probably last forever.

Re: closs-quarters drill

#8

Re: closs-quarters drill ebay purchase

Gary in Zirconia, NC

>I've bought three of these clones and they seem to last a week or two and the switch goes. Is there a fix for the switch? I've thought about wiring them direct and have an external on off switch.

Re: closs-quarters drill

#9

Re: closs-quarters drill ebay purchase

Darryl Hansen

>yes you can get a switch fom almost any place that repairs small motors. I replaced my Souix switch about a year ago and the price was close to what one of the clones cost $25. Darryl

Re: closs-quarters drill

#10

Re: closs-quarters drill

Russell L. Babbitt Jr.

>I have been told that Souix makes the drill for Milwaukee....

Re: closs-quarters drill

#11

Re: closs-quarters drill ebay purchase

Earl Eyre

>Very strange...I bought one off ebay about 1 1/2 years ago. I've used it since then, sometimes daily, sometimes 2/3 times a week and it's still going strong.

Earl