Small steps...
steve antonucci
>It is "up" but not running yet...
When I went ot the Woodcraft in Allentown, it was like fate. Someone had commited to buy it, but had some external issues that made them reneg. It was crated in the back, with my only to-do being to pay for it and load it. As it were, I had a sales call at Mack Trucks (2 blocks away) that morning, and returned after my meeting to load it.
I strapped it to the back of my truck and drove home with the crate without issues. When I got it home, I had hoped my buddy was home, but he didn't answer. Not being the most patient guy in the world, I pulled the 400# crate out of the truck and got it standing in the garage solo.
I opened the crate and assembled the saw on the palate that it was bolted to, and then set about building a mobility base from a set of old Compaq server wheels (7000 series chassis could weigh 300#). I then carefully laid the saw down and attached the wheel dolly to the bottom.
Upon standing the saw, I came to understand exactly how much I can dead lift and press. It is exactly the weight of the Rikon 18" bandsaw, and not another ounce. There was a point when I thought that it was actually going to be slightly less than the weight of the saw, but I did manage to stand the saw upright.
My initial impressions (no power applied yet) is that it seems to be a pretty good saw. No plastic parts, things lock tight, parts move smoothly, heavy duty construction... I'll shoot some pictures when I've done the wiring and post here.
steve