Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Boxelder Form

Posts

Boxelder Form

#1

Boxelder Form

Scott Greaves

>A couple of years ago, while in Provo, I bought some of this wood off a guy who said he cuts a lot of wood for Mike Mahoney. Whatever! The top looked really plain, and I thought I'd try something other than a collar. The little piece on top is Afzelia burl, and it is glued in place. It had a big bark inclusion on the other side that I filled with coffee grounds.

Scott.


img

Re: Boxelder Form

#2

Picture 2 

Scott Greaves

>


img

Re: Boxelder Form

#3

Steven Antonucci

Big WOW on the form, not crazy about the top

steve antonucci

>That form is spectacular. The way that the wood is 'composed' , it almost appears to be on fire.

But I don't understand the topper? If you were going for a lidded vessel, I would think that it should have been like a bottle stopper (fit the hole, tapered to a square?) The stopper also appears quite a bit thicker than the vessel, which makes my brain wonder "did he mean that?" The opening reminds me of the square peg, round hole saying...

I have a vessel that I thought needed something- and I turned a lid for it. I like the vessel, like the lid, but I'm not sure about them together. They sit together in my office, before I "final finish" it. Been about 6 months for the vessel (from it's last spin on the lathe) and 2 months for the top. Just sitting there for me to look at...

Please don't be offended by my comments- I think that your work is awesome absenting my view of the finials.

Re: Boxelder Form

#4

Re: Big WOW on the form, not crazy about the top

Scott Greaves, Blackfoot Idaho

>Thanks Steve!

I'm not offended at all! I had concluded that the tops on these two forms were pretty much garbage. There are things I like about the square top, though. Maybe if I make it convex instead of concave, a little bigger so it completely covers the opening and looks like it's melting onto the form of the bowl, then add a delicate finial to the very top? I don't know, but that's what's fun about turning!

Thanks for the comments!

Scott.

Re: Boxelder Form

#5

Re: Big WOW on the form, not crazy about the top

Barry Irby

>Scott, I was thinking that if you could concave the lower side of the square and make it fit exactly the shape of the top you could make a square collar. I would have it cover the hole entirely but make a small hole in the center.

I made a cutting board using the same idea. I had a piece of birch 14" square 2" think and turned it concave on both sides so that it just sits on the corners. Works great. Any juice runs to the middle and the curve fits the shape of my knives. You can get your fingers under the edge to lift it.

Re: Boxelder Form

#6

It is great to see you posting again. Excellent!

Dave Smith, Longview, WA

>