Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Turning cedar???

Posts

Turning cedar???

#1

Turning cedar???

Lou Krupnick

>just found a bunch of large 16" dia. cedar in my local log dump, the question is though, does it turn nicely? Was wondering if it was worth getting all resined up for....

Thanks,

Lou in MD

Re: Turning cedar???

#2

Eastern Red Cedar? You bet!

Carole in VA

>

Re: Turning cedar???

#3

Re: Eastern Red Cedar? You bet!

Pat Mulligan

>Not too resinous usually.

Re: Turning cedar???

#4

Re: Turning cedar???

Scott Hurley in N. VA

>I've made several pieces out of some cedar I got from my neighbor. It turns very easily, and it has a beautiful grain pattern and coloring. However, it is fairly weak, (see picture - the ornament walls weren't too thin when it broke off), and I've had fits getting sanding marks out of it. I had to sand up to 1500 grit to get all the marks out of a small bowl I made. However, free wood is good wood!

Scott


img

Re: Turning cedar???

#5

Re: Turning cedar???

The Wood Spinner / Bill Hale

>This looks like purple heart. So does the brake !

Bill in Casa Grande, AZ.

Re: Turning cedar???

#6

Re: Turning cedar???

Scott Hurley in N. VA

>It's just the red part of the heartwood. I know it's cedar, because I helped my neighbor cut it down. I still have a lot of it left.

Scott

Re: Turning cedar???

#7

Re: Turning cedar???

JKJ in East TN

>What kind of cedar? If you mean Eastern Red Cedar, yes it turns nicely. Very soft. Not resinous, but may tear on the end grain. I used cabinet scrapers on some cedar, wax and sand paper on others.

I don't like the look of a penetrating finish, so I finish with beeswax.

Note that more than just a few people (including me) get an alergic skin reaction to the dust. I have to wear a long-sleeved shirt.

JKJ