Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Chuck. Talon, Stronghold and ???

Posts

Chuck. Talon, Stronghold and ???

#1

Chuck. Talon, Stronghold and ???

John, Ohio

>I own both the Talon and Stronghold chucks and want to try another brand. I want it to have similar size jaws as the Talon #2 but with a smooth dovetail and is tightened by turning the key clockwise like the Talon. What am I looking for? Thanks.

Re: Chuck. Talon, Stronghold and ???

#2

Re: Chuck. Talon, Stronghold and ???

Ed Moore

>I would take a good look at the Vicmarc chucks. Some excellent pros have recommended them to me in private.

Ed

Re: Chuck. Talon, Stronghold and ???

#3

Curious

Bill Howatt

>Why do you want to try another brand assuming you are satisfied with the Oneway chucks? Seems to me you have more flexibility with jaws that fit all your chuck bodies. Oneway does make smooth dovetail jaws for the Talon and Stronghold if that's an issue.

Bill

Re: Chuck. Talon, Stronghold and ???

#4

Re: Chuck. Talon, Stronghold and ???

Fog Tanner

>I have two Strongholds and the large keyed Vicmarc. I use all three, but, I am going to get the 3 1/2" Vic and maybe another of the large Vics. I have most of the jaw sets for the Strongholds, but I prefer the dovetail jaws and don't want to spend another hundred dollars on dovetail jaws for the Stronghold. And you can't get the Shark type jaws for the Stronghold.

Overall I like the fit and feel of the Vic better than the Strongholds, but that is my own experience.

Re: Chuck. Talon, Stronghold and ???

#5

Re: Chuck. Talon, Stronghold and ???

John, Ohio

>Fog, I sent you an email but thought I would let everyone know what Craft Supplies answer was to the question of which way the Vicmarc tightens. They said they never know which way it tightens (clockwise or counter-clockwise) until I get it. If it isn't clockwise I am sending it back. Thanks.