Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Turning video recommendation?

Posts

Turning video recommendation?

#1

Turning video recommendation?

Marym

>We picked up our new used Powermatic lathe today, and now need to get back into turning again.

It has been many years, and not comfortable just starting to turn without some sort of review....

A good video would be ideal, if someone here could recommend one that really is for a beginner that would be great. The limited amount of turning we have done makes us beginners, so something that really covers the basics would be great.

Thanks!

Re: Turning video recommendation?

#2

Re: Turning video recommendation?

Jim Shaver Oakville, Ontario

>Hi,

I will recommend the Bill Grumbine Bowl Turning DVD. It's a good review of some basics and well techniques, all well explained in Bill's special style.

I also have enjoyed some of the Raffan videos on turning, bowls, boxes etc..

Take care,

Jim

Re: Turning video recommendation?

#3

Re: Turning video recommendation?

Matt Birchfield

>Hi Marym,

I highly recommend this AAW-Produced video. I wouldn't be turning if it weren't for Mark. This video does a great job of teaching and building skills with progressive projects, and Mark has a wonderful method of teaching. He's been teaching woodturning in High School (along with other IA subjects) for 15+ years. I watch different parts of it frequently.

Here's a link if you are interested in checking it out: http://www.woodturner.org/products/videos/video_stleger/

Re: Turning video recommendation?

#4

Dave Shombert

Re: Turning video recommendation?

Dave Shombert

>Hi Marym,

I'm glad to see it worked out about the PM lathe. The speed control works OK? You got a good one at a good price. It may not have a lot of fancy gadgets, but it's got lots of good, high quality cast iron and, in my opinion, that's what matters most.

I have not seen the Bill Grumbine video, but Bill is a frequent contributor here and everyone seems to like him. He's taught many people to turn. I haven't seen the Mark St. Leger one either, but our club has had Mark come and demonstrate several times. He is absolutely one of the best demonstrators I've ever seen - clear, concise, humorous, obviously loves what he's doing. I would imagine that a video featuring him would cover a lot of ground and be very helpful.

I have the David Ellsworth videos and like them very much. I went to his place for the weekend workshop a few years back (highly recommended), and the videos are almost as inspiring as being with him in person. They're mostly about hollow forms and bowls.

If there's a woodturning club in your area, especially one that's an AAW chapter, they will probably have a video library you can use.

You're hooked. Enjoy

Dave Shombert

Elkins, WV

Re: Turning video recommendation?

#5

bill grumbine

DougJ in Crawfordsville, IN

>

Re: Turning video recommendation?

#6

Re: Turning video recommendation?

Marym

>Hi Dave,

Thanks, the speed control works very well. Thinking about changing the belt, in case it has a set to it from sitting for awhile. It seemed like there was just a slight bit of vibration when running, so maybe from a set in the belt?

It is such a nice heavy solid machine, much better than anything that we would have bought new. Very excited about it...

Thanks for everyones help here!