Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

New Nova Chuck question

Posts

New Nova Chuck question

#1

New Nova Chuck question

Rob in Kansas

>Well my new Nova chuck came in yesterday and I have a question as to using the woodworm screw. It looks like a 1/4" hole is the right size to drill to thread it on? Also should it be deeper than the length of the screw or try and get it the same depth?

I'm off to the farm to see my grandpa and cut some fresh wood to practice on. So I'll check back this afternoon once I'm back.

TIA,

Rob

Re: New Nova Chuck question

#2

Re: New Nova Chuck question

Carole in VA

>Rob, for what it's worth, I use a 5/16 hole. Drill it just a tad deeper than the distance that the worm extends from your chuck. Be carefull with the green wood...it seems that the threads can lose their grip somewhat as the wood dries. I just started using my woodworm so maybe others will have better advice.

Re: New Nova Chuck question

#3

Yes. Follow Carole's advice.

Garrett in Victoria

>

Re: New Nova Chuck question

#4

Dick Hines

Re: New Nova Chuck question

Dick Hines

>I don't use the wood worm very often but I would sujest not useing it on end grain. The threads will not hold.

Re: New Nova Chuck question

#5

Good point Dick

Carole in VA

>Forgot to mention that.

Re: New Nova Chuck question

#6

Re: New Nova Chuck question

Rob in Kansas

>Okay, thanks for the input. I ended up finding a box elder that had blown over, but was still alive. I'll cut it up and see if I can do a shallow bowl/plater type form and show some nice red. I'll also get into some walnut I'd cut before. If I'm at all sucessfull I'll post a pic.

Rob

BTW, grandpa was as ornery as ever, so I guess he's doing okay.