Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Turning Ipe

Posts

Turning Ipe

#1

Turning Ipe

RPE

>Does anyone have any experience turning Ipe. I have the opportunity of getting some cutoffs 2x2 and 2x6 from a contractor. It is very heavy. I just wondered what it will do to my tools, and how it will turn up. Is it pretty, etc. Any other considerations as to it's toxicity or anything else?

Thanks

RP

Re: Turning Ipe

#2

Re: Turning Ipe

Jim King

>RP:

There are at least two colors of IPE, here we call it Tahuari. There is a dark golden color and a black. Here we use the black and I am attaching a photo. It is the hardest wood we have and takes a finish like a mirror but have your grinder close.


img

Re: Turning Ipe

#3

Re: Turning Ipe

Carole in VA

>I have not finish turned any of it, but I have turned some of it for jam chucks. Wear a respirator! And as Jim say, have our grinder ready to go. I think that suff must have a lot of silica or something in it because it eats the edge on a gouge pretty quick. Looks like it would finish up like mahogany or teak.

Re: Turning Ipe

#4

Re: Turning Ipe

Roy Girolami

>I have seen Ipe also called greenhart. Greenhart splinters if stuck in you will turn septic. Be careful when turning and don't rub your hand over the moving stock.

Roy Girolami

Apex, NC

Re: Turning Ipe

#5

Re: Turning Ipe

Pat Mulligan

>I've used it in house construction and it is hell on router and drill bits.The sawdust is kind of greasy.Good luck.