hey Keith....
Jennifer@Indy.USA
>I've been searching Harbor Freight looking for that live center you're talking about and can't find it? Do you have a catalog number?
Thanks :)
Knowledge You Can Build On — Est. 1998
hey Keith....
Jennifer@Indy.USA
>I've been searching Harbor Freight looking for that live center you're talking about and can't find it? Do you have a catalog number?
Thanks :)
Re: hey Keith....
GaryG in MD
>Go to the HF site, click the "search" link on the left, and type "live center" in the box. It takes you to: www.harborfreight.com/cpi/ctaf/headsearch.taf?function=Search
Looks good. I've been needing one myself! ...Gary
for me "center" worked, "live center" bombed
adrien
>
Re: hey Jen....
Keith Tompkins
>I just looked at the new catalog....NOT there! I'll have to find the old one, or go online. I'll email you if I find it!
Re: hey Jen....
Keith Tompkins
>Yep, it's online....I used Cen-Tech center as the key word, and it came right up...38573OVGA
Thank You :)
Jennifer@Indy.USA
>
Re: hey Jen....
Jennifer@Indy.USA
>Ah, that's a different one than came up on my search. This looks more suitable. I just might have to check it out. Every now and then HF has something that fits the "thrifty" bill. Thanks Keith.
Jen
Re: hey Keith....
Ron in Drums PA
>Is this the live center you are talking about?
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=40090
I have this one for about two years now, it gets hot pretty quickly now when I use it. I've been thinking about taking it apart to see if I can greese it up.
Or this one?
Clem Wixted
>http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=38573
Re: hey Keith....
Keith Tompkins
>HI Ron, Clem found the number I was referring to....see below
Try this one.
Terry Quiram, Roanoke Illinois
>Jen
I am currently using one of these sets. Mine doesn't get hot.
http://www.use-enco.com/CGI/INSRIT?PMAKA=251-3020&PMPXNO=2984208&PARTPG=INLMK3
Terry
Re: Try this one.
Craig Daymon
>Man! I have to pay more attention to those Enco catalogs when they arrive! Thanks Terry.
-Craig