toolrest
bob lyon
>Hi- Does anyone happen to know where to order long toolrests for a jet mini.Thanks BL
Knowledge You Can Build On — Est. 1998
toolrest
bob lyon
>Hi- Does anyone happen to know where to order long toolrests for a jet mini.Thanks BL
Re: toolrest
Carole in VA
>Most anywhere...Packard, Lee Valley, Bestwoods. I have been told that you probably should not use a rest any longer than about 9" on a mini. The stem is not heavy enough to really support it without vibration if you get really aggressive or if you have huge catch towards the end of the rest, it could just snap.
Re: toolrest *LINK*
John Lucas
>Bob I bought mine from bestwoodtools. I bought the ofset one. It has 3" on one side and 6 on the other. That's really handy for doing bowls.
http://www.bestwoodtools.com
Re: toolrest *LINK*
Sean Troy
>I always recomend Lea tools. John will custom make one for you and the cost can't be beat.
http://www.woodturningtools.net
Re: toolrest
JKJ in East TN
>Bob,
You might do a search of this forum - there was a discussion about this a few months ago.
I needed one in a hurry for a jet mini so I made it by welding a 12" piece of 1/2" steel round stock to a vertical rod. I only use it for thin spindles so I haven't noticed any of the vibration Carole mentioned and a huge catch is not possible. I've bought other toolrests from Best Wood Tools and can recommend them for quality.
JKJ