Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Looking to buy a 3/4" bowl gouge...

Posts

Looking to buy a 3/4" bowl gouge...

#1

Looking to buy a 3/4" bowl gouge...

Paul in Phoenix, AZ

>...any recomendation/experiences. I kinda want a "Euro" design with a full 3/4" flute. I plan to use it for roughing out large bowls and hollow forms. I have been looking at P&N, Robert Larson and Jerry Glaser (would be nice but don't know if I can afford that much).

TIA

~Paul

Re: Looking to buy a 3/4" bowl gouge...

#2

Re: Looking to buy a 3/4" bowl gouge...

TD

>Paul, you won't use the 3/4" gouge nearly as much as you might think. I have one with the regular handle and one with the Texas handle. The one with the regular handle never gets any use and the other is mostly used to take bark off green wood; I use my 1/2" gouges (5/8) for almost everything. If I have to get way over the toolrest I will go for the big gouge for the extra distance it can handle. You definitely want the "U" shaped flute for removing bark.

TD

Re: Looking to buy a 3/4" bowl gouge...

#3

Re: Looking to buy a 3/4" bowl gouge...

Charles Bjorgen

>I bought the Hamlet 3/4" bowl gouge from Jacques Coulombe Ltd. in Canada. Going through their online currency converter, price comes out to a bit less than $90 US not including shipping. Part number is HTC086. The steel in my gouge is actually 7/8" but the flute does not seem to be a full 3/4". They do list a one-inch bowl gouge HTC087 that may have the flute measurement you want. Bear in mind the 3/4" tool is quite a piece of steel, one I use only for initial roughing of bowl blanks, much preferring the 1/2" Hamlet (5/8" steel) for general shaping and finish cuts.

FYI, if you sharpen your gouges with the Wolverine system, Oneway also offers a Vari-Grind jig for the larger diameter tools. I ordered mine directly from Oneway since I've never seen it listed in catalogs.

Re: Looking to buy a 3/4" bowl gouge...

#4

Re: Looking to buy a 3/4" bowl gouge...

John Lucas

>I'm going to have to chime in with the other 2. I have a Sorby 3/4" that was given to me by a turner who never used it. I don't use it either except for roughing really out of round pieces. Once they get round I go back to the1/2" that I added a longer handle to.

Re: Looking to buy a 3/4" bowl gouge...

#5

Ok, so maybe I'll stick...

Paul in Phoenix

>...with my 1/2 bowl gouges and get a couple of detail gouges instead. I've heard good things about the P&N detail gouges.

Re: Looking to buy a 3/4" bowl gouge...

#6

Re: Ok, so maybe I'll stick...

George Van in WI

>Thanks for posting this topic Paul as I was going to get a 3/4" also.I had just asked about the Glaser yesterday. If those that posted above don't use one much there is not any reason for me to have one. I will stick to my 1/2" Sorby & 5/8" Oneway and save the money.(for something else)

Re: Looking to buy a 3/4" bowl gouge...

#7

Re: Ok, so maybe I'll stick...

Rick in Colgate, Wi

>I have the sorby mega-gouge and never use it, seen it on sale at Woodcraft and felt I couldnt turn without it, I was wrong. Keep an eye out for it on E-bay!