Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

@#%#$ lacquer revisited

Posts

@#%#$ lacquer revisited

#1

@#%#$ lacquer revisited

David Breth

>My anger issues with lacquer are rekindled. Earlier in the week, I posted about trouble I was having with a spray lacquer can, got some great advice (as per usual on this site), problem resolved and the little stickpens actually look pretty good.

The stickpens had little rub-on decals of roses, and the lacquer worked out just fine with them.

Two days ago I turned a box for my wife. Going away the best fitting box I've ever done (out of the four or five I've ever tried). I put a rub-on decal all the way around it (chickadees, because my wife likes them). Looked really good. 1st coat of spray lacquer. The decal is cracking a bit, and some of the edges have curled over on themselves. Really hacks me off. But, there's a lesson to be learned here, I just need to figure out what it is.

The application method was the same for the pens and the box.

I can not explain why this happened, but if anybody has insight, I would sure like to hear it because I don't want to repeat this. Wood type? (pens were poplar, this was a banister blank somebody gave me that had for pieces of wood glued together) Differences in rub-ons that caused a different reaction with lacquer?

Arrrggghh.

David B.

Re: @#%#$ lacquer revisited

#2

Re: @#%#$ lacquer revisited

RussFairfield

>Now you know why a lot of folks use oil finishes.

You have discovered why Lacquer is the easiest finish to use, and why it can be the most difficult to get good results.

Re: @#%#$ lacquer revisited

#3

Re: @#%#$ lacquer revisited

David Breth

>I much prefer oil finishes. Oil is what I use to the exclusion of almost everything else - easy, and I like the look. But I needed something in this case that would coat over the decal. Probably should have just use a poly.

Re: @#%#$ lacquer revisited

#4

Re: @#%#$ lacquer revisited

John Lucas

>David I'm guessing the rub on decals and the lacquer aren't compatible. The solvent in the lacquer is probably reacting with the glue in the decals. The only cure would be to try some other finish, at least for the first coat. When I did Decoupage (about 100 years ago or so) we used water based poly to build the thickness. I don't remember using anything special as the first coat over the decals or glued on photos. I would think you need to put on an extremely light coat for the 1st 2 or 3 applications. This would allow the solvent to flash off quicker and may not disolve the bond on the decal. Russ probaby knows that I am a strong proponent of doing tests on scrap material. Unless you know as much as Russ there are too many materials out there that aren't compatible with each other. A test on scrap save you the heart ache of ruining something.

Re: @#%#$ lacquer revisited

#5

Re: @#%#$ lacquer revisited

Ken Oakley-Sunny St. Cloud, Fla.

>Years,(maybe lite years), ago when I worked for a living as an archetectural modelmaker we used sheet styrene for some of the formed shapes we needed. If the had to be painted to achieve an effect, and we used mixing celulose lacquer sprayed on,the styrene would actually melt when the lacquer made contact. We over came this by first applying a few light coats of Krylon Clear Matte spray. It did not harm the styrene and the lacquer adhered to it very well. Might try a few samples to see if it helps you with your problem.

Re: @#%#$ lacquer revisited

#6

Re: @#%#$ lacquer revisited

Sonja Lemon - Sacramento CA

>David, To start with, try a seal coat on your turning (Zinnser primer/sealer works very well as an undercoat-wax free!). Apply the decal, wait awhile, then a very thin coat of lacquer. Allow this to dry well, and then you can spray a heavier coat.

Re: @#%#$ lacquer revisited

#7

Re: @#%#$ lacquer revisited

David Breth

>Well, I kind of figured out my problem. I READ THE INSTRUCTIONS ON THE DECAL PACKAGING, which tell you to apply a thin coat of varnish over the decal. It worked. Didn't even know I had varnish until I read that and hunted around the cans of stuff in the shop.

Duh.

David B.