Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

HF tools

Posts

HF tools

#1

Keith Tompkins

HF tools

Keith Tompkins

>I had the chance today to check out Cen-Tek (sp.) live centers from HF. I must say, they are impressive, esp. for the price...about twenty bucks. Smooth, and no play in the bearings at all.

I also noticed a small chuck mounted on the end of a #2 morse taper in the catalog....anybody here try one of these?

Re: HF tools

#2

Re: HF tools

Walt Drummond, Middlesex, NJ

>Keith, I have two of them. They work just great. I use them to hold fostner bits when I'm drilling depth holes in the goblets I turn. Love 'em, and the price was just great, too.

Walt

Re: HF tools

#3

Re: HF tools

Fred in NC

>I have two of the live centers, and two chucks. I use one each in my metal lathe. They are very good.

Re: HF tools

#4

Re: HF tools

Doug Trembath

>Keith, do you think they would stand up to those of us, (like me) who put quite a bit of strain on a live center? I turn some fairly large blanks between centers, and my Woodfast centers are politely asking for new bearings after only 6 or 7 years. I'd be interested in your opinion.

Doug Trembath

Studio in the Woods

Re: HF tools

#5

Re: HF tools

Rob Ceraso

>Hi Fred -

Is the morse taper on that chuck threaded for a drawbar?

Thanks,

Rob

Re: HF tools

#6

Re: HF tools *LINK*

Fred in NC

>It is not threaded. You can get threaded Morse tapers, with or without chucks from Little Machine Shop. No affiliation.


Morse tapers etc.