Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Bill Grumbine video

Posts

Bill Grumbine video

#1

Bill Grumbine video

John Lucas

>I did a demo for our club last night on basic bowl turning. When I got finished I noticed that someone had returned the Bill Grumbine video to the library so I took it home and watched it this morning. I wanted to see how Bill did things differently than I do. I swear if you watched my demo and then watched Bill's video you would think I copied him. Honestly I didn't. So naturally I'm going to give this video a good recommendation. I've spent close to 20 years turning bowls and learned much of it the hard way. Then I started going to demos and symposiums and watching other turners. There I learned a lot of other techniques that refined mine. Bill is teaching these same techniques in his video. If I made a video it would end up being just like him, except you can fit 3 of me in the same space. Good job Bill.

Re: Bill Grumbine video

#2

Re: Bill Grumbine video

Patrick Capobianco

>I enjoyed watching Bill's video very much except he didn't mention anything about tool selection and turning speed, since I'm a beginner.

Re: Bill Grumbine video

#3

Re: Bill Grumbine video

John Lucas

>I don't mention speed either other than to not turn any faster than you feel comfortable. My lathe doesn't have a speed readout so I don't actually know. I don't know if Bill's does either.

As for tools there are so many on the market it would be hard to do anything other than recommend the ones that you use personally.

Re: Bill Grumbine video

#4

Keith Tompkins

Re: Bill Grumbine video

Keith Tompkins

>John, I have a signed copy of Bill's DVD. However, I don't own a dvd player yet. :( Maybe for Christmas.

Re: Bill Grumbine video

#5

Re: Bill Grumbine video

Jim Shaver - Oakville, Ontario

>Hi,

I received an autographed copy last year from my secret Santa (thanks David). I enjoyed watching the DVD several times, Bill is a really good teacher and he comes across in the video as he is live.

I guess it's over 6 years ago now when I first met him at his home in Easton, he taught a Canadian how to make shavings with turnings tools...Thanks again Bill.

Take care,

Jim

Re: Bill Grumbine video

#6

Send it to me in the meantime, Keith!

Doug Trembath

>

Re: Bill Grumbine video

#7

Re: Bill Grumbine video

Barry Irby

>DVD Player is Cheaper than the video or any good turning tool and may actually be more useful than some of them.

Re: Bill Grumbine video

#8

Re: Anyone ever converted your POORformax

Binen

>I have Bill's DVD and would recomend it to anyone learning to turn.

Binen

Re: Bill Grumbine video

#9

Link to Rod Peterson's Review of this DVD *LINK*

Garrett in Victoria

>Cheers, Garrett


Grumbine DVD Review