Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

bowl finish

Posts

bowl finish

#1

bowl finish

Patrick Capobianco

>I just applied mineral oil to my maple bowl, can I also apply a wax to give it alittle more sheen, and how long do I have to wait to apply the wax?

Re: bowl finish

#2

Re: bowl finish

Don O.

>You can definitely apply wax over mineral oil. Many people use a beeswax/mineral oil combination to assure food safety. You should be able to put the wax on any time after the oil has soaked in a little. Some people put the 2 on at the same time and work them into the wood. Remember that mineral oil will never dry/harden/cure, but is easily replenished as needed.

Show us a picture of the finished bowl if you get a chance.

Re: bowl finish

#3

Re: bowl finish

Patrick Capobianco

>If I could figure it out I will send a picture.

Re: bowl finish

#4

Re: bowl finish

adrien

>I think you've confused mineral oil with the ones that will polymerize and set up. Mineral oil stays liquid while tung oil, linseed oil, etc hardens.

Re: bowl finish

#5

Re: bowl finish

Don O.

>I just read the post again. I stated that mineral oil will NEVER dry/harden/cure, but can be replenished, like for a cutting board. You are correct that it stays liquid. In fact in some places it is labeled "Liquid Parafin".