Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Glaser 3/4" Gouge Question

Posts

Glaser 3/4" Gouge Question

#1

Glaser 3/4" Gouge Question

George Van in WI

>I was looking at 3/4" bowl gouges. Does anyone have experience with the new 3/4" Glaser gouge? I understand the flute to be only 5", that seems really short. I have never used one. I was also told the 5" tip is V-15 steel, adhesive attached to the shaft. I have always heard nothing but good for the Glaser gouges but this one brings up a question. Thanks for the advice.

Re: Glaser 3/4" Gouge Question

#2

Re: Glaser 3/4" Gouge Question

Sean Troy

>George, you get that one or the 1/2" and you will be totally spoiled. That steel lasts a good long time and can be replaced by heating and then removing. You can re-insert a new tip with ca glue. You won't have to for a very long time. They hold an edge exceptionally well.

Re: Glaser 3/4" Gouge Question

#3

Re: Glaser 3/4" Gouge Question

George Van in WI

>Thanks. Glad to hear they last a long time Sean, do you know where they sell the replacement tips? I have not seen them advertised.

Re: Glaser 3/4" Gouge Question

#4

Dave Shombert

Glaser gouges - important update

Dave Shombert

>Normally,Packard Woodworks can order the replacement "tips", i.e. an unhandled gouge, and have it shipped to you directly from Glaser. Perhaps this is only if you bought the tool from Packard in the first place - I don't know that, but I guess it's possible. Anyway, Brad Packard told me the other day that Jerry Glaser has sold his business and is working with the new owners to get them on their feet. For us Glaser tool afficionados, this is good news. I think Jerry is in his late 80s now, so it's good to know that the line will continue. But Brad thinks that it'll be awhile before the new owners are up to speed on things like drop-shipping unhandled gouges.

Dave Shombert

Elkins, WV

Re: Glaser 3/4" Gouge Question

#5

Re: Glaser gouges -Heard that

Bud

>Stuart Batty is one among others that will be involved with new tool designs, and the new company will be called CET for (Cutting Edge Technologies.

Bud in IL

Re: Glaser 3/4" Gouge Question

#6

Re: Glaser gouges - important update

George Van in WI

>Thanks Dave, at least I know it was possible.

Re: Glaser 3/4" Gouge Question

#7

Re: Glaser gouges -Heard that

George Van in WI

>Thanks for the information Bud. I went to their limited website.

Re: Glaser 3/4" Gouge Question

#8

Re: Glaser gouges - important update

Bill Neddow

>There is quite a bit of information about the new owner of Gerry Glaser's company at www.turnwood.net/. There is a feature interview here with the new owner, Paulo Martin. After talking to Stuart Batty at the Albany symposium recently, I certainly will be giving these new tools a try.

Re: Glaser 3/4" Gouge Question

#9

Re: Glaser gouges - important update

George Van in WI

>Thanks Bill, the interview clears up a lot of questions!

Re: Glaser 3/4" Gouge Question

#10

Re: Glaser gouges - important update *LINK*

Paulo Marin

>CryoSteel Engineering and Technology was already an established entity when acquired Glaser Hitec Tools from world renowned tool maker Mr. Jerry Glaser. Jerry is currently a consultant for CET for the "new and improved" Glaser Hitec line which is scheduled to be launched in the beginning of 2006. I do not plan to drop ship tools directly to customer, since my goal is to enhance and strenghten my distributorship.

Paulo Marin

ceo

CryoSteel

Glaser Hitec Tools


CryoSteel Engineering and Technology

Re: Glaser 3/4" Gouge Question

#11

Glaser gouges - important update ??

Dave Peebles Lyons, Ohio!

>Hello Paulo,

I may have missed it.... but these links go to sites that have no content. :)

I do wish you the best of luck in your new company. And I am looking forward to seeing the new tools. Just don't change them too much, I love all my Glaser tools. :)

Best wishes,

Dave

Re: Glaser 3/4" Gouge Question

#12

CryoSteel and Glaser Hitec websites *LINK*

Paulo Marin

>Currently the websites are under construction, in lieu of the new tools coming out. As soon as all production has been established, the websites will be a wealth of information for the end user. It will contain articles about steel, techniques, angles of cutting, comparison charts etc. I appreciate all positive and encouraging comments from my fellow woodturners. Please support manufacturing in America and support the AAW.


img

http://www.glaserhitec.com