Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

What I do wrong?

Posts

What I do wrong?

#1

What I do wrong?

Ian

>I finished a maple and padouk segmented bowl a couple of day ago.

Sanded to 600 and applied a coat of minwax wipe on gloss poly.

48 hours later the maple areas are great. the padouk areas look great but are still tacky to the touch.

any suggestion or possible causes. I know its not the finish itself i used it on another piece of oak with no problems yesterday.

IAN

Re: What I do wrong?

#2

Re: What I do wrong?

Carole in VA

>Since no one else has responded, I will hazard a guess that it has something to do with the oil in the padauk. Perhaps a wipe down with acetone or something before applying finish would help?

Re: What I do wrong?

#3

Re: What I do wrong?

Earl

>Another possibility is that the paduck was still a little wet or at least moist. Poly doesn't like that. I wouldn't worry about it. Just let is sit for several days/weeks until it's dry to the touch. I'm sure the finish will dry eventually. Then re-buff or buff with some 0000 steel wool and wax.

Earl

Re: What I do wrong?

#4

Re: What I do wrong?

Curt Fuller

>There must be a learning curve to using the poly finishes, wipe on or spray. I've had similar problems along with temperature related problems causing bumpy finishes. I bought two cans of the minwax spray poly gloss. I left one in the garage where it got quite cold (30 degrees). It seems like it affected the stuff because it just won't spray well, dry well and leaves a bumpy surface. The other can that was kept and used in the house works fine.

Re: What I do wrong?

#5

Re: What I do wrong?

Jim King

>Many tropical trees have natural oils that take a long time to dissapate. Boiling eliminates this problem by removing the oils and allows for a perfect finish.

Re: What I do wrong?

#6

Re: What I do wrong?

Ian

>Thanks everyone for your input, I guess I will let it set for a while to see if it dries and then buff and wax. If it doesn't set or I get inpatient I will remove the finish and start over. hope the wife can keep me away from this piece.

IAN