Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

not a turning...

Posts

not a turning...

#1

not a turning...

Ed Kelle

>but I will post it anyhow. Sycamore sculpture 18" tall. Done mostly using rasps and files, but I did manage to kill 2 Proxxon mini grinders on this. Lots of hours of hand work on this one. Stained and finished with shellac, I still want to wax it to give a softer sheen.

This actually took longer in wood than when I have worked in stone.

I've got a few large pieces of sycamore that I hope to turn someday soon, though they have been sitting for about a year now. Any insights into how this wood turns?

Comments welcome!


img

Re: not a turning...

#2

Re: not a turning...

Mike Schwing from Md.

>Very nice lines, sensuous, everything flows together nicely. You didn't state it, but what was your inspiration for this? It is "birdlike", almost resembles to me a chick with its mouth open waiting for momma bird to feed it from the nest. I find it very challenging to carve/shape something like this because it is so difficult to keep all of the various shapes involved complementing each other. You did this very well.

Re: not a turning...

#3

Ditto Exactly what Mike said!

Jennifer@Indy.USA

>It's beautiful Ed.

Jen

Re: not a turning...

#4

Re: not a turning...

Dennis Daudelin

>Very nice carving!! I can just bet that it took lots of hours!

You asked about turning Sycamore, I find that it's very soft so it turns quite easily with the standard sharp tools! It also have some fun quartersawn figure which is fun to play with and important to design for!

Dennis

Re: not a turning...

#5

Re: not a turning...

Molly Winton

>I'm with Mike and Jen on this one. The lines are very sensuous, and all of the elements work and flow together. I bet it's a joy to hold.

Re: not a turning...

#6

Re: not a turning...

Vicmarc.fan

>I live in eastern Kansas and for some reason the wood dump here always has a supply of Sycamore. Beause it is free I have turned quite a bit of the stuff. It is med. soft but I really like the grain pattern. Sometimes I use water based aniline dye something like you have done just to get the grain to pop a little more. My problem isnt turning it is drying. It splits pretty bad for me but I dont know what I am doing. Microwaving does strange things to the fibers and results in tearout for me. I have more rough-outs I have soaked in alcohol that will be dry enough to turn if what I read is correct (three weeks). I have a turkey roaster to try boiling if the alcohol dosent work. If you turn as well as you carve it must be something. Liked your work, I think.

Ron

Re: not a turning...

#7

Re: not a turning...

Ed Kelle

>Thank you Mike. I am not sure what inspired it, but it just took shape over a long period of time. It was a nasty piece of firewood with chainsaw marks all over. As I went, I sketched flowing lines. I would work for a few hours then leave it for a few weeks. As I went I kept pushing back parts, getting deeper here and there, curving more and twisting it inside itself. And I saw the birdlike form developing. Looking upwards, waiting to unfurl its wing and reach out. When I finished I named it Pre Flight.

I never know where I am going with most of my works and that makes for some great adventures while in the process.

Re: not a turning...

#8

Well then thank you too! :)

Ed Kelle

>

Re: not a turning...

#9

Re: not a turning...

Ed Kelle

>Thanks Dennis, don't even want to think of how long it took.

Sycamore seemed pretty hard while carving but hopefully it will be easier to turn. But don't be suprised if you see me carve the turning afterwards

Re: not a turning...

#10

Re: not a turning...

Ed Kelle

>Thanks Molly. Yes it sure is nice to hold. And when I was doing lots of the sanding work, I found out that it fit quite nicely against my neck and shoulder, kind of like playing a violin! Do you think I could have know that while I was designing? nah!

Re: not a turning...

#11

Re: not a turning...

Ed Kelle

>Thanks Ron. I have had this wood for about a year now so hopefully it is not still totally green, but I am still planing on using the alcohol method just to be safe. Stay tuned for some sycamore works in the future

Re: not a turning...

#12

Re: not a turning...

Carole in VA

>I really like this, Ed! Very fluid. And it does bring to mind a baby bird begging for food!

Re: not a turning...

#13

Re: not a turning...

Ed Kelle

>Thanks Carole, I like to think of it as he was waiting to get released from the big hunk of firewood. :)

Re: not a turning...

#14

Sold it today :)

Ed Kelle

>

Re: not a turning...

#15

Way to go Ed!!! Cha-ching!

Jennifer@Indy.USA

>

Re: not a turning...

#16

Re: not a turning...WOW they are beautiful

Jill

>