Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Bosch super handles

Posts

Bosch super handles

#1

Bosch super handles

James Brooks in GA.

>Does anyone have or have used Trent Bosch super handles with the P & N gouges. I like my Glaser and was wondering how the two handles might compare. You can fill Trents with sand or lead shot to what ever amount you might need.

Thanks

Re: Bosch super handles

#2

Re: Bosch super handles

georgetroy

>I have one that I use on various gouges and tools. It has a foam handle and is aluminum. A hole is in one end only. You get adaptors for any tool in the ranges of 3/8"-3/4". I also have Kelton, and Oneway handles. Normally I will use a longer Kelton or Oneway for heavy duty work and then various other handle lengths for the smaller gouges. I converted many of my tools by knocking out the wood handles. My Arthritis likes holders like those mentioned. I have had the Trent Bosch handle for 2 years now. It's okay, but so is the others. No P&N tools here. GT

Re: Bosch super handles

#3

Re: Bosch super handles

George Van in WI

>I have the 20" and use it with all but my roughing gouge. I fill it with shot. I do use P&N gouges in it, works great. It has a smaller diameter than the Kelton. I use the kelton handle on my roughing gouge which at present is a Oneway 5/8", I use this because it is heavier.

Re: Bosch super handles

#4

Re: Bosch super handles

Joe Flemig

>James,

I have three of Trent's handles. I have a 3/8" Sorby, a 1/2" Sorby and a 1" Sorby in them. Led shot too. I love them. As comparisons, I have an Exocet - my favorite interchangeable handle, four Glasers, a Hosaluk, and three McNaughtons. I tend to dedicate handles, but do interchange occasionally.

Joe Fleming - San Diego

Re: Bosch super handles

#5

Re: Bosch super handles

James Brooks in GA.

>Thanks George and Joe