Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Myrtle Pot

Posts

Myrtle Pot

#1

Myrtle Pot

Jennifer@Indy.USA

>Hello Everyone,

This is a piece of Myrtle that I got from Kurt Krauter a while back. Thank you Kurt! This wood came from the inner piece left over from a veneering log. I love this wood and the way it turns. It does have some cracking...and I honestly can't remember if I gave this one the alcohol soak treatment or not? Anyway, the cracks you see have been filled with epoxy and ground coffee. Don't remember the roast :) There are similar cracks on the opposite side. Almost a mirror image of the ones you see. It's about 10" diameter and 6" tall. Finished with Watco Danish oil natural, then several coats of Rockler wipe on gel poly. The black bands are done on the lathe with a small artist paint brush and black gesso.

All comments and critiques are welcome.

Thanks for taking a look-see :)

Jennifer


img

Re: Myrtle Pot

#2

Myrtle Pot.....Coffee Pot?

Jim Shaver Oakville, Ontario

>Hi Jen,

What a neat shape, I like the way the shape comes up to and forms the neck�nice details with the rings too�.I like the natural aspect of the wood as well, even the coffee filled cracks have a nice appeal to them, following the form.

:~}

I was beginning to wonder what you had been creating in the studio these days, it�s great to see your new work posted!

Take care,

Jim

Re: Myrtle Pot

#3

Re: Myrtle Pot

Bernie

>Great piece and I like the bands.

I have some myrtle I've been meaning to get to.

Bernie

Re: Myrtle Pot

#4

Re: Myrtle Pot

Thomas Skaggs, Foothills of Mount Level

>I like the nice fluid shape of it. Very cool.

Tommy

Re: Myrtle Pot

#5

WOW! What an improvement.

Dave Smith, Longview, WA

>Hi Jennifer,

The wood Kurt gets has sure improved since he started selling it instead of turning it himself. Just a wonderful piece young lady. About the black rings that were applied while the piece was on he lathe. Was the lathe turning when they were applied?

Dave Smith

My lathe is going really slow today, it is unplugged in Longview, WA.

Re: Myrtle Pot

#6

Nice!

Ed Kelle

>Really great Jen. I like the use of black as a nice contrast with this wood.

OK, stupid question here, is there a reason people use coffee grinds to fill in the cracks? I keep seeing it all over. Just an affordable material or is it because it is dark?

If I guess how many mini's fit in this, do I win it???

Good job on both bowls

Re: Myrtle Pot

#7

Classy!

TD

>

Re: Myrtle Pot

#8

Re: Myrtle Pot

George Van in WI

>Thanks for the lesson Jennifer; I like the way the lines flow through the neck. Until now I do not think I would have thought have using a taller neck but I am learning.

The finish and bands are very appropriate. Thanks for posting.