Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

today's lessons

Posts

today's lessons

#1

today's lessons

John Lucas

>Fact 1. Thin CA glue flows through cracks in the wood really, really well.

Fact 2. CA glue remover doesn't work as quick as you might hope. (see fact 1)

Fact 3. CA glue remover really burns open cuts. (see fact 1 and 2)

FAct 4. Don't get anywhere near me when I have a bottle of CA glue. I should Probably have a referee or something to keep me from doing stupid things.

Re: today's lessons

#2

Re: today's lessons

Mike Schwing from Md.

>We've all got our own CA stories, John. You might think you're the dumbest guy around, but did you ever CA your thumb to your lathe? No? Come on? Never CA'd your thumb to your immobile lathe, not 10 feet from the CA remover, but a million miles away for all the good it did? Never went through the decision making process of losing good skin or just hanging around till Mrs. Schwingding, er.. Mrs. Lucas got home? Never felt the searing pain of flesh being torn from your thumb as you freed yourself? No? Well, don't do it, besides looking foolish it hurts.

Re: today's lessons

#3

My CA lesson

DougJ in Crawfordsville, IN

>Have you ever CA'ed your toes together.

See your Fact #1 and do it while bare footed.

I think thats all I want to say about that.

Re: today's lessons

#4

What a laugh

John Lucas

>Thanks Doug. that was really funny.

Re: today's lessons

#5

Re: today's lessons

John Lucas

>Mike Maybe we should make a pocket in our smocks to carry the CA remover. It should be centered in the front so we can access it with either hand.

Re: today's lessons

#6

Re: today's lessons

William Duffield, on the Cohansey

>A-ha! That may have been the inspiration for the turned and carved piece on the far left of this photo, taken at the May meeting of First State Woodturners.


You can find another photo of the same piece somewhere on the page in the provided link.

Re: today's lessons

#7

Re: today's lessons

Lan Brady

>John,

While filling a void in an oak bowl. I couldn't understand the amount of CA it was taking. TO get a better light angle on the void,I bent over the lathe and discovered the glue had dripped out the other side of the crack.

At 2:00am, I was glued to the lathe bed and 6 inches too far from the remover. I used the panic button on my key chain to wake up my wife (along with everyone else in the neighborhood). The story gets told often at family gatherings now!!!

I think that I broke several rules that night,Lan

Re: today's lessons

#8

That beats my CA story

Bill Howatt

>I had the thumbs and index fingers of both hands glued to bowl and had to punch my intercom with my elbow to get my wife to come and apply the solvent.

Bill

Re: today's lessons

#9

Re: That beats my CA story

JimQ

>Back in the 70's I was running a model RR specialty shop, and CA was relatively new. I had a customer who arrived with his finger in his mouth. It seemed that he had been using a #11 X-Acto knife to stick small detail parts onto a scale building. Somehow he managed to jab the end of his index finger just after he got CA on it. What's the immediate reaction to punctured finger? Insert in mouth! Result - finger stuck to tongue! He didn't know what to use as a solvent and just drove over to find out. I told him Acetone, as in nail polish remover. After he visited the drug store next door, he informed us that nail polish remover tastes like @#$%.

JimQ

Re: today's lessons

#10

and my CA lesson...

Dale Sherman, Manlius, NY

>a couple of summers ago I was walking out of the shop with my German Shedder, Nick, when a squirrel ran by us and into the shop. Nick gave chase, but the squirrel turned around and lashed out at him, laying his nose open. I grabbed the CA glue and glued the cut shut, but not before I glued my finger to Nick's nose. I suddenly had 85 pounds of canine trying to get away from the smell and shake my finger off. He darn near shook my arm off before the glue let go. I finally pinned him again and completed a successful repair on the second try.

Next time I'll just grab the duct tape.

Dale

Re: today's lessons

#11

Hot foot!

Mike Schwing from Md.

>Bet that felt good as it cured. I recall someone here admitting that got CA glue all over his fingers, and in a fit of habit, sprayed accelerator on them!

Re: today's lessons

#12

Great

John Lucas

>Oh dale that's the hardest I've laughed in a long time.

Re: today's lessons

#13

Re: and my CA lesson...

George Van in WI

>Hey Dale, you just started my day off on the right foot. My wife and I are still chuckling. Worth $10.000 on America�s Funniest video. I am sure when it happened it was no laughing matter!

Re: today's lessons

#14

Re: today's lessons

Ed Moore

>A well-known woodturner was teaching a bowl-turning class in Annapolis and was putting a waste block on the blank with CA glue. He leaned over and pressed down with both hands, not realizing that he was extruding the glue so that it was contacting his blue jeans. He glued the blank to his jeans in front of his class. I think a penknife was the only means of separation available.

I keep several cans of acetone around the shop. I think my major CA problem occurred when the glue wicked through the pores of some red oak into the palm of my hand.

Ed

Re: today's lessons

#15

Re: today's lessons

Mark Kauder, Phenix City, AL

>Boy, are you guys stupid. I never.....well maybe once, er....almost never...........OK, I did most of this stuff at least once.

I swear, I am never going to pull the lid off of a CA bottle with my mouth again......I swear.....no, really....

Mark

Re: today's lessons

#16

Re: today's lessons

Tim GC

>Call SWMBO into shed to comment on newly turned Natural Edge Bowl with Voids, having applied CA to assorted cracks.

Wonder at the silence she maintains while admiring said bowl she holds, with my help, in the car during the 40 min journey to town looking for a shop stocking a bottle/tube of release agent on a SUNDAY!!! and not wanting to contemplate the picture we will make, entering the local A&E/Truma Room jointly holding my latest effort!!

Oh Boy did I smile when I found some in the Duty Pharmacy. However, SWMBO did not keep to her apparent vow of silence and threatened to place the CA somewhere other than on the shelf where I normally keep it!!!

(She loves me really ... she told me)

Re: today's lessons

#17

HAHAHAHA!

Mike Schwing from Md.

>I can only imagine what my wife would do in the same situation. They are wonderful creatures, are they not?

My wife will willingly gaze, nod, and pretend to admire all sorts of things that I present to her with a "hey Honey, look at this!". Might be a particularly good HDTV show. Might be a bowl. Might be a snake in the garden, or even a really nice antler rub on a tree. She just nods along and makes associated interested sounds. I love her for that.

Re: today's lessons

#18

Re: That beats my CA story

David Breth

>1) There's a solvent for this stuff? That would have been nice to know before I shook my hand in pain when the stuff soaked through a rag and the rag flapped around like a waving hanky, and then ripped it off the end of my finger - you know, before it "dried". Yah. Good test of my tear ducts - tears come out of your eyes pretty instantaneously, don't they.

2) I felt like a moron relating the above story a couple of weeks ago. Looks like the pack fell back toward me a bit.

David B.

Re: today's lessons

#19

Re: today's lessons

Jorge Castaneda ~ Downeast Maine

>In the same vein, early in the game, I managed to glue my fore arm to the lathe bed and an incredible amount of contorting and stretching like chewing gum let me finally grip the remover bottle. I felt very stupid, now I am a lot more careful, specially when using it in the end grain sections of a bowl, it goes right through it. We should wear latex gloves when handling the stuff.

Re: today's lessons

#20

For today's belly laugh, read the Shop Follies *LINK*

Garrett in Victoria

>article from WC Articles & Reviews. (Can't believe we've been doing these for almost 3 years...)

Cheers, Garrett


Shop Follies

Re: today's lessons

#21

Re: today's lessons

Ed Kelle

>With all these stories, you guys nearly jinxxed me today. Came very close a few times.

However I did manage to build my own wire burner today then proceeded to give myself a few nice burns after forgetting that the darn thing gets hot after use.