Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Small rhododendron NE hollow form. PICs

Posts

Small rhododendron NE hollow form. PICs

#1

Small rhododendron NE hollow form. PICs

Dave Smith, Longview, WA

>Rhododendron burl from wood I was given in August. The tree had been down and cut into firewood lengths for about a week before it was given to me. The waxed blank sat outside my shop until early November when I roughed it out. I wrote the date on the bottom with a new gel pen and it disappeared while soaking in alcohol. Not all gel pens are created equal. The roughed out hollow form soaked about a week before I had a chance to take it out. It was roughed out to about 1/4". Top through the neck is 1/16" thick. Thickness increases midway through the body to 1/8" at the base.



Nice eyes on the low side. Base 1 1/4". Body 2 1/4 maximum and neck 1 3/4".



Some flame figure on the high side. Height is 3 7/8".



The data card for the hollow form. I took the piece out of the alcohol on the 12th and wrapped it but didn�t take the first weight until 24 hours later. All weights are in grams. The piece was effectively dry on the 17th when I took a long weekend. It only lost 3 grams over the next week before finial turning it on the 24th. Finished piece weighs 33 grams.

The number (224) is the sample weight of the soaking solution when I took the piece out and corresponds to 92% alcohol.

Sanded to 600 initially and between coats. Finished with 2 coats of Rockler�s Gel Polyurethane. No buffing.

I asked about turning rhododendron a couple months ago and the advise was it will crack and split no matter what I do. I beg to differ with the advise. I also have two crotch bowls that also dried without cracking or excessive warping.

Comments welcome.

Dave Smith

I can turn most anything no matter how long it takes in Longview, WA.

Re: Small rhododendron NE hollow form. PICs

#2

Re: Small rhododendron NE hollow form. PICs

RevDoug

>Go Dave. I'm getting pretty tired of folks saying "you can't." 9 times out of 10 that makes me want to prove them wrong. It wasn't that long ago that they told me I couldn't turn bowl on my Mercury lathe. That's all I turn on now. Have a ball on it too.

Anyway, nice piece of rhody. Grain is much more interesting that I thought it would be. 8)

Turn 'em round,

Re: Small rhododendron NE hollow form. PICs

#3

I was going for a record.

Dave Smith, Longview, WA

>Hi Rev,

I thought I could get at least 300 views without a response. Oh well, over 250 views without a response has got to be in the top ten.

Thanks for your comments Doug. The piece is much more interesting than my poor photography shows. It is straw color and I don't expect it to darken. I have two bowls in a craft mall that don't appear to have changed color since finishing them 2 months ago. Rhody is a wonderful wood to turn IMHO. Lilac, on the other hand, is very brittle with twisted gain and splinters easily.

Dave Smith

Wife says my grain is a little twisted also in Longview, WA.

Re: Small rhododendron NE hollow form. PICs

#4

Re: Small rhododendron NE hollow form. PICs

ken chase

>Dave:

I turned a small piece in the shape of a tapered cup out of

wood given to me by a friend in La Quinta. It looks just like

the wood on your piece. Has some holes that look chocolate color

around the edges. Now I know what it is. Thanks

Ken

Re: Small rhododendron NE hollow form. PICs

#5

Steven Antonucci

How do you know how many views?

steve antonucci

>I haven't seen an option to include a hit counter?

BTW- I've got the same issue as you do, I think.

Re: Small rhododendron NE hollow form. PICs

#6

Re: How do you know how many views?

Ryan Dicker in Renfrew, Ontario

>I think the hit counter only shows up through the viewing preferences. I'm not sure exactly what setting to use though...

Ryan