Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Mini Lathe Purchase

Posts

Mini Lathe Purchase

#1

Mini Lathe Purchase

Sam Dean

>Hello all,

Looks like I'm in the market for a new mini lathe. My little friend of 15 years, the carba tec, finally bit the dust last night. After all the years of rigs and fixes to keep it going, and the fact it has served me very well, it's time to retire the little lathe. It seems like the popular concensus is that the Jet VS mini is the way to go, so who has the best price? They're $380 at Amazon with free shipping plus a $25 rebate. Anyone know of a better rate?

Also, has anyone tried the Woodtek Midi Wood Lathe? It looks like a nice little machine and the price is right, but it's not available in a VS model. Any and all input is appreciated, as well as suggestions for other mini's in that price range. Send me an e-mail if you have a used mini that you want to sell as well. I've got a lot of Christmas work I'm in the middle of, so I need to order something in the next few days.

Thanks,

Sam

Re: Mini Lathe Purchase

#2

Re: Mini Lathe Purchase

Scott Greaves, Blackfoot Idaho

>Hi Sam,

I agree, the Jet mini VS is about the nicest one out there. Stay with VS if you can. The new Rikon at Woodcraft sounds interesting, but it's new, and I'd like to see how it performs over a space of time. I don't know who has the best prices, but Amazon usually does pretty well, and you can encourage all your friends and relatives to give you Amazon Gift Certificates for Christmas!

Scott.

Re: Mini Lathe Purchase

#3

Re: Mini Lathe Purchase *LINK*

John Lucas

>Sam I was just down in Atlanta and Highland Hardware had really good prices on the Jet mini's but I don't remember exactly what they were. They also had a Rikon mini lathe that looked very good. It would be worth a call to see. I didn't see the Rikon in thier web page but the lathe looks solid, the belts are easier to change and I think it was a little longer, maybe 14 to 16".

If you really love your Carbo-Tec I have one for sale.


http://www.tools-for-woodworking.com/index.asp?PageAction=VIEWCATS&Category=237

Re: Mini Lathe Purchase

#4

Re: Mini Lathe Purchase

Barry Turner

>My wife bought me a Jet Mini lathe for Christmas 2001. Best Christmas I've ever had! I've turned pens, paperweights, ornaments, small bowls, a ton of lidded boxes, etc. Even a 9"+ bowl.

Don't bother with the VS version. INMHO it's just not worth the added cost. The belts are easy to change on the Jet Mini and quite adequate. Actually, you don't have to change speeds all that much anyway with a lathe in this size range. Just pick one of the intermediate speeds and have at it. If you are turning smaller items like pens, just pick a higher speed.

Re: Mini Lathe Purchase

#5

Re: Mini Lathe Purchase

Niedling

>Sam,

You can't go wrong with the Jet Mini ( standard or VS ). They have proven themselves to be a well built, solid performing machine. I am like you, I would probably get the VS.

Re: Mini Lathe Purchase

#6

Re: Mini Lathe Purchase

Don Henthorn

>Just remember that the Jet VS has the same speed range as the non VS. Convenience is the only difference. Either choice is a good one.

Re: Mini Lathe Purchase

#7

Re: Mini Lathe Purchase

Mark Wollschlager

>My wife has offered to buy me a mini for an early x-mas gift.

My Delta 1440 vibrates a bit much for the ornament finials I am making this season.

I was spoiled by a Oneway 1224 at the Campbell Folk school last month, but that size purchase is not on the table at this point.

She had seen the Rikon in the current Woodcraft circular and asked if that one was ok. I was sort of dreaming of a Jet VS mini.

As far as the Rikon goes...

I don't know if they are based on ( copied from ) an existing model or are a new entry. According to the specs it has an additional 2 inches of swing, the head indexing and an addidional 20 lbs of mass over the Jet.

The Jet is a known quantity. The turning club I am in has a bunch and aside from some motor and switch issues with the VS I have heard only good things. And I have used one. But its $100 more.

Does the motor of the VS have much torque at the lower speeds? Or I guess I mean with the motor bog/heat more at low rpms while sanding or other low speed uses.

I will have to head over to Woodcraft to look at the Rikon.

She wants to know by the end of the month, so I am researching a bit here.

Mark.

Re: Mini Lathe Purchase

#8

Re: Mini Lathe Purchase

Russell L. Babbitt Jr.

>Why does nobody ever mention the VicMarc mini? Besides maybe the Oneway I consider it the best built mini on the market. I have two. Price maybe? The Jet is a great lathe for the money. Get EVS and you will never go back, it is worth the extra bucks. One drawback to some of the mini's is the inablility to run the speed below about 500 rpm.

Re: Mini Lathe Purchase

#9

Re: Mini Lathe Purchase

John Lucas

>If it was me I would not buy the VS jet. There are to many things to go wrong and I know the have had some problems with the motor. They also don't have much torque at the low end and don't pull as hard at the upper speeds as the single speed jet. I've owned several mini lathes over the years and still have 2 (4 if you count the Jet mini VS that I'm rebuilding, they had bad motors). I don't miss VS at all on a mini lathe.

I to think the Vicmarc is the best built mini but it's a little more expensive than the Jet. I have a Nova Comet which was more or less a copy of the Vicmarc (or vise versa I don't know who came first). I love my Nova and will never sell it. It has fixed speeds with a step pulley but it only takes about 15 seconds or so to change speeds.

Re: Mini Lathe Purchase

#10

Re: Mini Lathe Purchase

Dick Anderson

>I have the Jet Mini VS and the Technatool Mercury. Both are very good. Jet is a little bigger and a couple pounds heavier. Mercury VS can be slowed to less than 500 rpm, which is good for thread chasing and other things. Mercury is also better for traveling such as going to demos, vacations and demo turning at craft fairs.

Re: Mini Lathe Purchase

#11

Re: Mini Lathe Purchase-Vic

georgetroy

>I too think the Vicmarc Vl 100 is one of the best mini's. I have had one for a few years. Strong and willing. No worry about broken parts. Fit & finish superb. I have mine hooked up to a 1/2hp motor. Added was a 9" tool rest from best tool. The tool posts are 3/4" not 5/8" like Jet and the Delta. Yes I have turned on the club's Delta's and Jet Variable Speed. Everytime I do I just believe more in the Vicmarc. Yes they are more expensive just like car brands. Craft Supplies USA has them in stock. GT

Re: Mini Lathe Purchase

#12

Re: Mini Lathe Purchase

Chris Teenor

>The latest copy of Workbench magazine has a comparison article of mini lathes. The Jet came out on top, but the review was of the non-VS model. The Rikon, which Woodcraft has on sale this month, was not included in the article. (Probably too new.)

Re: Mini Lathe Purchase

#13

Re: Mini Lathe Purchase

Sam Dean

>Thanks to all for the input! No question about it, if she would let me spend the money, I'd have a new vicmarc on the way! I've been spoiled by VS too long, so I can't go back (even with the low torque at slow speeds). I do mostly spinldes, ornaments, bottle stoppers and pens on the mini, so it's not much of an issue. I've got the old powermatic for bigger stuff, any way. I have a Jet VS mini on the way from an e-bay store for $362.51 with shipping out the door (plus a $25 rebate from Jet). It should be here by Wednesday - I'll provide my first impression when it arrives. Again, thanks to all for your input.

Happy turning,

Sam

Re: Mini Lathe Purchase

#14

Re: Mini Lathe Purchase

Mark Wollschlager

>FWIW I went to Woodcraft to look at a Rikon. They had none and had no idea when THEY would get to see their one. ( It could just be this particular Woodcraft :-/ )

I ended up ordering a Jet mini and stand. Hopefully it will be in before X-mas.

I will save VS for a Stubby, whenever I can afford it.

mark.