Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Pine?

Posts

Pine?

#1

Pine?

George Fitzpatrick - Springfield MA

>This turning thing is really getting to be fun...

I recently took a bowl turning class (will post pics soon for critiques) and made a segmented bowl out of cherry and purpleheart. It got me thinking, though. Has anyone tried making segmented bowls out of scrap pine 2/4's?? Obviously readilly available, and already dried. Gonna have to try that one...

So much wood, so little time... :)

geofitz13

maker of fine sawdust

Re: Pine?

#2

JL

Re: Pine? - how about fir?

JL

>I don't like the big growth rings in pine that much. It can be attractive though. (Meanwhile, waiting for another pie to come out before the ham goes in...)

Re: Pine?

#3

Re: Pine? - how about fir?

George Fitzpatrick - Springfield MA

>For practice, I got a 8'x4"x4" doug fir beam, cut it into 6" long pieces, and started making sawdust. Got some interesting shapes, but was not happy with the figuring or color. Seems kinda orange-ish, with very large growth rings. Also got a lot of end grain tear out, but most probably due to operator error.

After consuming massive quantities of fowl this afternoon, I plan on trying to upload some pics of some of my pieces. As a newbie, it will be good to get some criticism.

geofitz13

maker of fine sawdust

Re: Pine?

#4

Re: Pine? - how about fir?

Curt Fuller

>I've also turned a little douglas fir from beam cutoffs, etc. It does tend to tear easily but one thing it does that's kind of neat is it makes a textured surface when you sand it. The hard/soft wood in the rings is very distinct so the more you sand the more the hard part of the ring is raised as the soft part sands away. Plus it smells like Christmas trees while you're turning it and that's a plus.

Re: Pine?

#5

Re:Look for a recent ...

JamieDonaldson

>... posting by Mark Kauder for a masterwork from such humble beginnings! I don't recall the title, but someone will chime in with further details I'm sure.

Re: Pine?

#6

Re:Mark's bowl *LINK*

Brian Hahn in SW Wisconsin

>Mark's post is near the bottom of this page, but as we all know that's a moving target.


Mark Kauder's 2x4 bowl

Re: Pine?

#7

Re: Pine? *LINK*

Ken Grunke from SW WI

>Our AAW chapter held a 2 x 4 challenge last summer, everyone started with a 4 ft long construction grade 2 x 4 (pretty sure they were fir).

You can see what we came up with in the link below, mine is the last one--NOT a prizewinner, understandably so :)


CRW 2x4 Challenge

Re: Pine?

#8

Re: Pine?

Fog Tanner

>Check my earlier posting of a Blue Pine Box. It is a 24 segment box made from Pine. I have made 9-10 pine boxes, some are finished with a dark shellac and others with a yellow, some with BLO and shellac and some with a neutral finish. You can do a lot with the grain if you want to take the time. There was also an article in one of last years AAW mags that had a platter made from a 2x4 in a basket weave type pattern.

I currently have a segmented box on the lathe that is a combination of pine and with two segmented cedar accent rings. No idea what it will look like yet, but then that is how you find what is good and what isn't - by comparison. I would say that if you want to know what a segmented pine bowl looks like, then go ahead and make one. It only really matters if you like it, and if nothing else you will have a comparison for later projects.

Fog