Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

How do you sign?

Posts

How do you sign?

#1

How do you sign?

George Fitzpatrick - Springfield MA

>I have noticed that many people sign and date their work. I was toying with the idea of a branding iron, but they seem too big to sign, say, the bottom or the foot of a bowl. What do you use for this? Is there a certain type of marker? Do you sign before or after final finishing?

Happy Thanksgiving to all...

geofitz13

maker of fine sawdust

Re: How do you sign?

#2

Re: How do you sign?

Dennis Y

>Fine tipped Sharpie before finishing. Just got burner and may start using it. Dennis

Re: How do you sign?

#3

Re: Staedtler Lumocolor pens...

JamieDonaldson

>.. work well- used them for years on film and contact sheets. Look for them in drafting supply stores.

Re: How do you sign?

#4

Burner

Carole in VA

>

Re: How do you sign?

#5

She Does A Beautiful Job Of It Too

Barbara Gill, Remlik VA

>

Re: How do you sign?

#6

Re: How do you sign?

John Lucas

>George I've tried everything and finally setteled on a Dremel Engraver. With a light touch you can sign very nicely. I leave mine plain, Cindy Drozda rubs gold wax into the signature. I don't like the brands because they are too large and look amatureish. I've tried wood burning but have trouble writing on some woods. I just can't seem to control it well enough.

Re: How do you sign?

#7

Re: How do you sign?

George Fitzpatrick - Springfield MA

>John:

I thought the idea of a branding iron would be good, but agree that they would be too large. I have a dremel, just have to look into the engraving. I assume an attachment?

geofitz13

maker of fine sawdust

Re: How do you sign?

#8

Re: How do you sign?

Brian Hahn in SW Wisconsin

>The Dremel engrager is a separate tool -- the vibrating engraver that they sell for putting identification numbers on items.

My experience matches John's. I like the engraver because it works on everything and the piece is "hand signed", a nice touch.

Re: How do you sign?

#9

Re: How do you sign?

George Fitzpatrick - Springfield MA

>aahhh....so it's off to the store (tomorrow...) Soon, I will graduate from maker of fine sawdust to maker of....something!

geofitz13

maker of fine sawdust

Re: How do you sign?

#10

Re: How do you sign?

Bruce McElhaney Spring Lake, MI

>Just won a new Dremel Engraver on ebay for 12.09 plus shipping. check it out.

Re: How do you sign?

#11

Dremel Engraver

Jennifer@Indy.USA

>

Re: How do you sign?

#12

Re: How do you sign?

Fog Tanner

>George,

I use two different ways, depending on the wood and finish. On some of the cedar and lighter wood, I use a wood burner. On some of my cedar pieces and darker woods, I use and engraver and one of the "gold sticks" I got from Cindy Droza.

Most of the time I sign the piece after the finish is applied. The exception to this are the dyed pieces. I sign these with and engraver after they are finish sanded and before they are dyed. If I lime or patinate the piece the wax will fill in the engraving and the name stands out. If not the dye will be darker in the signiture and it stands out.

If I use the gold stick, I finish the piece and then sign it and rub the gold stick over it and wipe off the excess with a paper towel. The sticks contain lacquer so they are a finish unto themselves.

Fog

Re: How do you sign?

#13

Re: How do you sign?

Don Henthorn

>John, do you sand the signature after it is made? I find mt engraved signatures seem pretty rough.

Re: How do you sign?

#14

Re: How do you sign?

Dave Peebles Lyons, Ohio!

>Hello George,

I use the Staedtler Sketch pens. I bought a set of four at an art store. They range in size from 0.1 mm - 0.7 mm. They are sold as permanent and acid free. I use the 0.1 mm most of the time. It works really well for me.

I use Waterlox as a finish on almost all of my work. I use the Staedtler markers to sign my work after the final sanding. I have never had a problem with the finish affecting the signature.

I also have seen some of my work after a couple of years, and the signature still looks good. At least to my old eyes. :)

Best wishes,

Dave

Re: How do you sign?

#15

Re: How do you sign?

Peter Toch

>Hi:

I'm interested in learning more about and or getting a gold wax stick that you say Cindy Droza uses in signing her work. Does anyone have her email address so that I can contact her?

Peter Toch

Re: How do you sign?

#16

Re: How do you sign?

David Breth

>Printed with a black sharpie on the bottom, more or less in the form of a triangle. First name is one side, last name is another side, bottom is the date. The orientation is so you read it all from one direction - so you hold the bowl in one position to read all three sides of the triangle. Beneath that I write the type of wood. The triangle thing just grew out of the space available to me inside recesses, but now I use it for everything. I'm no great turner, but I figure someday my kids will end up with a number of items, and will want dear old dad to have signed them. Also, I number all my bowls and cups just to see how many I end up with lifetime.

David B.

Re: How do you sign?

#17

Re: How do you sign?

Fog Tanner

>They are sold under the BurchWood Casey label and can be had at any good gun shop. They are used for repair work on guns with gold inlay. I got mine from Cindy at a club demo, but she pointed out that you can get them from a gun shop. The real key to using one is to put on your other finish, and then sign with an engraver and apply the gold stick over the other finish. When you wipe off the excess, the name is left filled in. It takes a little practice to get it right, but after the first couple, you should have no problem.

Fog


img

Re: How do you sign?

#18

Re: How do you sign? *LINK*

Fog Tanner

>That was supposed to have been a link, entered the wrong field, sorry..

Fog


http://www.cindydrozda.com/