Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Gluing collars

Posts

Gluing collars

#1

Gluing collars

Carole in VA

>I am wondering if I ought to be using something other than CA when gluing collars to a vessel, especially when they are dissimilar woods. Is wood movement going to cause a problem. Should I be using the "flexible" CA?

Re: Gluing collars

#2

Re: Gluing collars

Ted Okolichany

>Carole,

I use wood glue like Titebond to glue down the collars that I put on my hollow forms. This way you can move it around to get the way you want it to look.

Ted

Re: Gluing collars

#3

Steven Antonucci

Align the grain of the collar with the form

steve antonucci

>I CA glue the collars and finish afterward. Even when I forget, I still haven't had any issues.

Steve

Re: Gluing collars

#4

Re: Gluing collars

Dale Cook

>Hi Carole. I've been using weldbond glue with good results. It dries clear,seems very strong,and have not had any failures. I was using ca or epoxy but I think they get to brittle and with any movement I had a couple that let loose and re-glued with weldbond.I also turn some alabaster with wood rims so I need something that will move a little.Good Luck!

Re: Gluing collars

#5

Re: Gluing collars

Jennifer@Indy.USA

>Carole, I use to use CA but I had one pop off once and from then on changed to wood glue. No problems since.

Jen