Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Home made lathes

Posts

Home made lathes

#1

Home made lathes

ThomD

>I want to tank all the folks who provided links a while back on large home made lathes. I enjoyed them all!

I will probably try to do something by adapting my Conover to a larger swing, first. I could probably get by with that alone. I don't turn big bowls any more, too much like standing in front of a hail of paintballs. But large platers do happen. And I don't want a gap bed even if I can't fully use a larger capacity.

Re: Home made lathes

#2

Re: Home made lathes

John Lucas

>Thom Turn the headstock around on your Conover and either build a free standing tool rest or rig up a bed and extended tool rest to go on the outboard side of the Conover. That way you still have the mass of the Conover lathe bed and stand and the versatility of a large bowl lathe.

Re: Home made lathes

#3

Re: Home made lathes *LINK*

Lloyd in CA

>Make one like this.


Awesome lathe

Re: Home made lathes

#4

Re: Home made lathes

ThomD

>Good idea, but I am kinda looking bigger steel on this project. Cynics would point to the new welder...

Re: Home made lathes

#5

Re: Home made lathes

ThomD

>Some great stuff for my spinning wheel project.

Re: Home made lathes

#6

Turn the head around

Jorge Castaneda ~ Downeast Maine

>That way you can make really big platters, the hurdle will be to make a self standing tool rest.

Just an idea

Jorge