Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Whats the tang size for home made scraper

Posts

Whats the tang size for home made scraper

#1

Whats the tang size for home made scraper

Tim Conlon

>Hi,

I just got a bar of steel for making some heavy bowl scrapers. The steel is 1.5 inch x 3/8 inch x 36 inch long, flat, oil quench, from enco ($40). If I cut it in four pieces 9" each, how much of that 9" should I give to the tang (part that sticks in the handle) and how much to the scraper? Was thinking: 6" blade and 3" tang should give enough support.

I dont have a commercial scraper so I cant see what the dimensions should be, has anybody taken one of them apart? any suggestions would help.

Thanks,

Tim

Re: Whats the tang size for home made scraper

#2

Re: Whats the tang size for home made scraper

Fred in NC

>Tim, 3" should be enough. Of course, that depends on the wood holding on to the tang. A ferrule usually reinforces the wood and is highly recommended.

Re: Whats the tang size for home made scraper

#3

Re: Whats the tang size for home made scraper

Bob R

>Tim.. What or where is enco? I have been using real old files ground down for scrapers but would like somthing harder and thicker to use. (maybe safer to as files do snap.)

Re: Whats the tang size for home made scraper

#4

Here it is ...

Fred in NC

>www.use-enco.com

Re: Whats the tang size for home made scraper

#5

I weld mine to a piece of 5/8" round stock.

Phil Joines

>

Re: Whats the tang size for home made scraper

#6

Tang, what tang?

Bob Hackett

>I grind a different shape on either end and then slide a foam grip from an exercise machine over the end I`m not using at the time.

If you can`t find the right size foam grip then go down to the local hot rod shop(or marine supply) and just buy a foot of whatever size hose fits over it.Hey,it works for Oneway,Hosaluk,Kelton,etc.

Mainely,Bob