Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Hamlet hollowing system ???

Posts

Hamlet hollowing system ???

#1

Hamlet hollowing system ???

Ed Moore

>Has anyone had experience with the Hamlet hollowing system? I would appreciate your comments.

Ed Moore

SW VA

Re: Hamlet hollowing system ???

#2

Keith Tompkins

Re: Hamlet hollowing system ???

Keith Tompkins

>HI Ed, I have one of those systems.....It takes a while to get used to it. I find that angling the cutter head downward works well and helps avoid catches.Holding it level invites huge cathes.

With the shield set close to the cutting edge, it tends to clog the cutter. I slide the shield way back to avoid clogging, then hold the tool so the cutting edge faces downward, as described above. It's still controllable in that way.

Like all Hamlet tools I have experienced, it's a well made item.

Re: Hamlet hollowing system ???

#3

Re: Hamlet hollowing system ???

Ed Moore

>Thanks, Keith.

I have also found Hamlet tools to be well-made. My interest in this system was raised when Jimmy Clewes recommended it at the OVWG Symposium last month. It turns out that there is a variation of the system with his name on it. Basically, he puts the small cutter on the big tool.

Which size cutter do you use? And is it hard or easy to sharpen?

Ed