Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Home made lathes

Posts

Home made lathes

#1

Home made lathes

ThomD

>Anyone know of some good sites and resources for home made lathes. I am not talking about pole lathes, or treadle lathes, though I like to look at them too. I am thinking mostly of something along the line of a Oneway rip-off, buildorama. Like the Robust lathe, though that is obviously a "product". With all the interest in welding and fabrication, there ought to be someone who has taken this on. FWW had several home made lathes, from I-beams, or the big box-O-bowl lathes.

Now that woodworking lathes cost like 6K, and metalwoorking lathes cost 1K I feel a great projest sucking sound. I already have a Graduate bowl lathe, and a Conover, so I am not in any particular rush.

Re: Home made lathes

#2

Re: Home made lathes

Fred in NC

>There have been postings on this site, a search for articles during the last year would be in order. Some of the homemade lathes shown are very big.

There are metal lathes under 1K, but most lathes used in machine shops are a LOT more expensive, like 10K or even more. Due to the nature of the material being turned, they have to be sturdier. Tolerances are much stiffer, and they have change gears and a carriage that are not used in wood lathes.

Re: Home made lathes

#3

Re: Home made lathes

Ryan McMullen

>I think it was Shop Notes had an article about 2 years ago on a homemade lathe. I made one, used it for about 2 months before I got a hand-me down lathe.

Ryan

Re: Home made lathes

#4

Re: Home made lathes *LINK*

Craig Daymon

>Popular Woodworking featured an article by the Woodwright's Shop's Roy Underhill a few years back that looked like a real nice project and one whose construction could be greatly simplified with the utilization of a few power tools such a drill press. (I'm personally interested in using it without power, not constructing it without power.) This article is doubly useful when accompanied by the Woodwright's Shop show that featured the same project. If you weren't fortunate enough to tape it or patient enough to wait for it to be on again, the tape of the show is available...somewhere. The show site is below, but I couldn't easily find the show tape.

-Craig


The Woodwright's Shop

Re: Home made lathes

#5

Re: Home made lathes

John Lucas

>I assume from what you said you don't necessarily want to build a rinky dink sort of lathe. I have seen somewhere on the web a series of photos a guy posted of a lathe he and a friend were building in thier machine shop. Possibly if you did a search of homebuilt wood lathes or some such thing you might find this. I have collected some info on homebuilt lathes but if you've seen the FWW article most of what I have are knockoffs of those.

Re: Home made lathes

#6

Re: Home made lathes *LINK*

John Lucas

>try this one.


http://home.vicnet.net.au/~pwguild/a-lth_kr.htm

Re: Home made lathes

#8

treadle lathe  *LINK*

John Lucas

>


http://www.his.com/~tom/sca/lathes2.html

Re: Home made lathes

#9

Re: Home made lathes

Don O.

>What about a "Moulthrop" style lathe. There was anarticle in FWW a while back (meaning years) that described how they built their monster from vehicle axles, pillow blocks and other odds and ends. Big, sturdy and powerful to turn their big pieces.

A guy up North of here built a lathe from a small pickup truck transmission. He says he has something like 16 forward speeds and 4 reverse. Not sure how he powers or supports it though-I have not actually seen it.

Good luck and remember to show us what you come up with!

Re: Home made lathes

#10

Re: Home made lathes

Ad de Crom Netherlands

>Just build one by my own, see http://www.members.lycos.nl/adecrom

Re: Home made lathes

#11

Re: Home made lathes

ThomD

>Nice site ADC!

Some great links there, from everyone.

I am thinking, John, about something massive. The Graduate turns 21" and weighs about 600 pounds. The Conover is a bit of an open book, but nominaly turns 16" with whatever bed length you want to put on it. I am looking at going at least as big as the Oneway.

It seems like a pretty easy build. They sell the tailstock, and the rest. The bed is just some CR tube with some flat stock welded to it. The really painful part would be fabricating the gussets, but any laser or plasma CNC shop could turn those out for no more than 10 bucks each The shaft/quill would be pretty easy to turn on any number of cheapish metal lathes. I had a nice combination machine a while back, and one of the projects on my list was to turn standardized shafts so that all my lathes could use the same chucking. Unfortunately my lathe started leaking oil, and by the time I got it back to the store where I had bought it and it turned out not to be serious, just a seal, I had already been refunded.

Basically that leaves just the machine head and bearings. I haven't looked into that yet.

Re: Home made lathes

#12

Re: Home made lathes

Roger

>Hello, Take a look at the site below. Fred makes a good living turning beautiful work on his 2 homemade lathes, and he's a great fellow on top of that. www.fredwilliamson.com.

Roger

Re: Home made lathes

#13

Re: Home made lathes *LINK*

Fred Holder

>Take a look at the Monister Lathe at my web site:


Monister Lathe

Re: Home made lathes

#14

Re: Home made lathes

ed

>I don't know of you have checked this out.The mother earth news magazine archives.$20 dollar wood lathe.It seems rather simple and hould not be too hard to scale up depending on your material that you have availible.Hope you find what you are looking for.

Re: Home made lathes

#15

Re: Home made lathes *LINK*

Eduardo Sarmiento Hall,lima peru

>see mine maybe you like it


http://WWW.ESARMIENTO.250X.COM