Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

tenon or recess

Posts

tenon or recess

#1

tenon or recess

Pat

>What is the prefered method to hold bowl in chuck, tenon or recess?

Re: tenon or recess

#2

Tenon

John Trant (Baltimore/DC corridor)

>

Re: tenon or recess

#3

Re: tenon or recess

The Wood Spinner / Bill Hale

>Tenon

When I started, years ago, used recess and tended to blow out as I worked the piece. The tenon has a better grip.

After rgh. turning and cure the tenon is easier to reshape round.

Good turning and be safe

Bill in Casa Grande, AZ.

Re: tenon or recess

#4

Re: tenon or recess

JKJ in East TN

>Outward force in a recess can pull the bowl apart, while inward force on a tenon compresses the fibers and can be stronger. I think the recess is good for plates/platters with plenty of wood in a large foot. If the recess can be left in the piece as a design element, it saves the effort of dealing with a glue block.

JKJ

Re: tenon or recess

#5

tenon

Norm Smith in Nova Scotia

>

Re: tenon or recess

#6

Re: tenon or recess

John Lucas

>I'm a tenon person. I always reshape my foot to whatever works for that bowl. If I have a recess I am limited on what I can do. Since the tenon sticks out further than the foot will I have total design access.

Re: tenon or recess

#7

Re: tenon or recess

Bill Neddow

>I agree with John. And if you are concerned about breaking the tendon off -- give the tendon end grain a squirt of CA glue. Wild horses will not tear it apart then.

Re: tenon or recess

#8

Re: tenon or recess *LINK*

RussFairfield

>They both have their benefits and faults. I discussed them as I see them in an old post in this forum that has been preserved in an Article, also here on Wood Central.


Link to: "Recess or Spigot??"

Re: tenon or recess

#9

Keith Tompkins

Re: tenon or recess

Keith Tompkins

>I agree with everything here, but would add...if you employ a recess in your pieces, it should NOT affect the final shape or form. Otherwise, you will be eternally making forms with a footprint that is too large, out of proportion with the rest of the piece...platters may be the exception here.