Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

I have the nicest looking workbench of all

Posts

I have the nicest looking workbench of all

#1

I have the nicest looking workbench of all

David Breth

>Now that I spilled about $5 worth of Watco Danish Oil on it. I'm not ordinarily given to foul language in the workshop, but I made an exception specific to that moment and felt much better afterward.

Slippery wet Latex gloves, needed a bit more oil in the cup I was using to dab the rag in, and knocked it right over. Ha ha ha. The stuff is viscous and fast-moving. I've now got a workbench, hammer, vice grips, screwdriver, ratchet drive that all have the shimmering quality to them that woodworkers have loved for generations - they really have that old-world appeal. A few paper items didn't survive the ordeal though. Like anything paper it came in contact with, including my favorite shoebox, where I keep all my odds & ends lathe tools (yeah, I know, I should store them differently. The shoebox was free, now I have to go buy another pair of shoes to replace the box).

So what was your greatest spill?

David B.

Re: I have the nicest looking workbench of all

#2

Re: I have the nicest looking workbench of all

Molly Winton

>Similar to you, I have a very nicely, unplanned finish on my wooden stool. I was trying to pour my Danish oil back into it's can from a tray I had used to soak my magic wands. I thought it would be easy, because it had a nice clean corner to use as a spout. WRONG. Dynamics being as they are with a long tray, hands not as steady as they used to be, and a small can opening, my stool and cement floor (parts not covered by shavings) have a lovely finish and shine. I did however learn, that if there is a possibility of spillage, to pour over a pile of shavings. They absorb quite nicely, and are easily cleaned up.

Re: I have the nicest looking workbench of all

#3

Mine Was.............

Jim Shaver, Oakville Ontario

>Hi,

...........I once spilt about half of my Mylands Friction polish into the shavings around my lathe once...it made a wonderful crispy gooey snow ball of wood and polish syrup...and the bed of my lathe was rust proofed for life!!

About a year ago I got wise, I bought some small dispensing bottles and filled them up with my polish now, it's easier to find now in a pile of shavings as well with the little red cap!

:-)

Take care,

Jim

Re: I have the nicest looking workbench of all

#4

Re: I have the nicest looking workbench of all

ThomD

>I spilled a gallon of acetone on the livingroom wall to wall carpet. Good carpet apparently, no damage of any sort.

Re: I have the nicest looking workbench of all

#5

Re: I have the nicest looking workbench of all

ThomD

>OOH OOH! My dad once nocked a gallon of paint off the shelf on a step ladder. We looked at the floor, the walls, everything was looking good. Then we looked at the ceiling.

Re: I have the nicest looking workbench of all

#6

Re: I have the nicest looking workbench of all

RussFairfield

>My biggest spill in the shop was the full gallon of lacquer that got knocked over on the workbench when I was moving a ladder in the dark to replace a lightbulb..

My worst spill in the house was when I came home one evening to find that a 6-gallon jug of brewing beer had exploded when the vapor-lock got plugged. The cat loved the stuff, and he walked around with a smile for a week. I gutted the room and replaced all of the furniture, but the smell of stale beer lingered for years.

Re: I have the nicest looking workbench of all

#7

Re: I have the nicest looking workbench of all

Bert Smith

>An entire gallon of contact cement on a concrete floor. FYI- a gallon of contact cement doesn't balance well on a saw horse.

Bert

Re: I have the nicest looking workbench of all

#8

Dick Hines

Re: I have the nicest looking workbench of all

Dick Hines

>A 8 gal. tub of soap and water I was using to dry bowls. Punched a hole about 2 inches up from the bottom. It was a good thing I had lots of chips to soak it up. Shop did have a nice orangeie smell for a month or so.

Re: I have the nicest looking workbench of all

#9

Re: I have the nicest looking workbench of all

David Breth

>Bert -

A couple of weeks ago, I was applying a little CA to a crack or something in a cup, and I went to spread it a bit with a rag (which I balled up for that purpose). Well, I guess I didn't ball it up as well as I thought because suddenly I had this intense burning sensation in my index finger tip. I jerked away and started shaking it for the pain. Then I noticed that the rag was flapping around attached quite nicely to my fingertip. I figured I better do it now, so before I had a chance to think about it, YOINK. Oh yeah, that made it feel a LOT better.

OK, so maybe it wasn't the smartest thing I've ever done.

Re: I have the nicest looking workbench of all

#10

Re: I have the nicest looking workbench of all

adrien

>I wouldn't call it a "spill," but while gluing the hands back onto a German cookoo clock, I managed to get a substantial amount down along the axis that turned the hands thus stopping time in its tracks.

The repairman acknowledged that mine was a unique problem that he'd never encountered before.

Re: I have the nicest looking workbench of all

#11

Re: Happy Cat! LOL

Ruth Niles

>

Re: I have the nicest looking workbench of all

#12

Re: I have the nicest looking workbench of all

Ruth Niles

>My worse spill was just a few days ago. I was using CA to secure hairline cracks on a bowl I was turning, not looking and thinking the cap was on (it's never on so I don't know where my brain was!), I twisted the top off, went to apply the CA and it poured out. I quickly picked up all the shavings I could and wiped as fast as I could. It was all over the ways and running down the front of the lathe bed and on the tool rest. There's a nice confetti look to the front of the lathe now. : )