Re: Lacquer-Poly-Oil-Shellac?
RussFairfield
>I use the homebrew mix of equal parts 100% Pure Tung Oil, McCloskey's Gloss Spar Varnish (in the red can) and Turpentine (pure gum spirits) because it holds up better than anything I have used in the last 50+ years, either commercial or homebrew.
The Tung Oil doesn't get as dark or as fast as Boiled Linseed Oil or the Soybean Oil that is in a lot of the commercial oil finishes. There are more solids than any commercial finish and I can build a nice gloss with 6 coats, and a surface that is the equal of most high gloss lacquer in 10.
This is the only finish that I have ever used that will withstand the environment of the galleries for a year and still look good, and it is easilly repaired should it need it. Too many galleries are terrible with turned wood. They are too often too hot, too bright, too much sun, too dry, and those damn water art sculptures get water drops on everything. Customers who insist on tapping the wood with their fingernails and rings are always a problem. The oil/varnish finish is the only one that will survive this environment for me.
There is always somebody who claims that there is no such thing as 100% Pure Tung Oil, but if that is what it says on the can, that is close enough for me.
I have some bookcases that have a 120 year old shellac finish that still looks pretty good; but has started to deteriorate in the last 10 or so years. I have tried, but I have never been able to duplicate that durability in a shellac.
I have never had a high gloss lacquer that survived past 10 years under normal conditions. Air Conditioning and low humidity is the enemy of lacquer, and it will last twice as long when there is none.
There are a lot of claims being made for the modern finishing technology. It will have to be up to someone else to look back in 50 years, and see if they are all they are claimed to be. So far their record hasn't been that good.
Others may have longer experience and come to different conclusions, but these are mine.