Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Turning with Kids

Posts

Turning with Kids

#1

Turning with Kids

Steve

>My 12 year old daughter wants to start turning with me. Has anyone had any experience turning with kids. Can you get kid size face shields and other equipment.

I am thinking of buying a mdid lathe for her to work on. Any thoughts on Jet vs Delta

Thanks

Re: Turning with Kids

#2

Re: Turning with Kids

Mark Trenier

>Dear Steve:

I am a teacher and just had 2 of my 8th grade students over and they both could handle my Jet 1642 lathe. One was rather small and a full size shield fit him fine. Take it slow with simple. I have not experience with either lathe, but I do own several other Delta machines and if and when they need fixing, parts take a long time to get here from China--as long as a year!

Give it a shot.

Mark

Re: Turning with Kids

#3

Re: Turning with Kids

Carole in VA

>I think the Jet Mini is the best little lathe you can buy for the money (or even more money) I have two lathes but I wouldn't give up my Mini for the world.

Re: Turning with Kids

#4

Re: Turning with Kids

Ken DeMarco

>Steve,

My 12 year old daughter has been turning off and on for a year now. she has kid size goggles but prefers to wear my face shield, it fits her fine. she turns on both the Jet mini and the Boice Crane, the bigger lathe doesnt intimidate her at all. I will second what Carol said about the Jet Mini-lathe, can't go wrong there.

Ken DeMarco

Re: Turning with Kids

#5

Re: Turning with Kids

Jennifer@Indy.USA

>Steve my now 12 year old son has been making pens for about 3 years. I think each child is different and you have to judge their individual maturity as to know when they can/should start. When you do get her to the lathe you will find nothing more fun and gratifying that to see her face after she completes her first project. It really is priceless. Enjoy!

Jennifer

Re: Turning with Kids

#6

Face Shield

Barbara Gill, Remlik VA

>If the small face shield hits her chest when she looks down, it can be trimmed with your bandsaw. Leave the protective cover in place or if it is gone, put some masking tape where you will cut. I started our granddaughter when she was 6 so the small shield was too long.

Don't forget breathing protection.

Re: Turning with Kids

#7

Rob Wallace

Re: Turning with Kids

Rob Wallace

>Today I'm doing a demonstration to our turners group on ornament turning. Last night, while I was turning some samples on my Jet 1642, my 8 year old son was turning on our Jet mini-lathe, which he considers 'his' lathe. He invariably asks to turn whenever we are in the shop, and the Jet mini is very appropriate for him, in that the scale of the tool is not intimidating, and he is very comfortable using this lathe. I recommend getting a smaller lathe for children so they can be at ease while turning. He is becoming pretty adept at making spindles, and has already asked to turn his first bowl. (Our goal is to have him able to rough out and finish a bowl on his own by this 9th birthday, which is about 5 months from now. He's well on his way.) I recommend starting with a 3/4 roughing gouge and teach how to turn a square billet to round. I then hand him a sharpened Sorby spindlemaster, and let him have at it, making whatever shape comes to mind.... (we use lots of scrap 2x4 pieces ripped to 1.5" x 1.5" and about 8-10" long). He loves practice turning with these short spindles, and when he thinks one's done, he sands for about 2-3 minutes, and then runs upstairs with the spindle to show his mom! Then he's back to the lathe to do another.... let them work at their own pace, and the "addiction" grows. It's a blast to watch.

Above all, teach safety first, including a complete check list for free rotation, tool rest position, etc. before any hand gets close to the 'on' switch. Enjoy!

Rob Wallace

Re: Turning with Kids

#8

Build a stand to raise her up a bit

Jim K in Trappe PA

>I taught my 12 year old to turn, and her biggest challenge was that she is about five inches shorter than me. I built a quick stand with two 18 inch lengths of 4x4, and an 18x30 piece of plywood, raising her up about 4-5 inches. That helped her a lot.

Re: Turning with Kids

#9

Re: Turning with Kids

Dave Bonde - Iowa

>I have two of the Jet mini lathes and they work well - no experience with the Delta. One thing you might want to consider is if you want to get the Variable Speed model. I have one VS and one not. If I could do it over I would not get the VS - the reason for me is I have 18 - 20 students in a class and when I have a student turning a project (pen or key chain) it is easy for them to turn the speed up faster than I want them to. It is much easier to regulate the speed of

the lathe. For you just with your daughter it may not be an issue but I thought I would at least

make you aware of it. Dave

Re: Turning with Kids

#10

Re: Turning with Kids

Steve

>I also hear that the Jet VS model was under powered. Any experience with that

Re: Turning with Kids

#11

Re: Face Shield

Steve

>Do you use regualr paper mask for dust protection.