progress update
ken chase
>These photos are posted for all on this board who have helped enormously with their generous answers to my incessant questions,
You know who you are. Much thanks
Knowledge You Can Build On — Est. 1998
progress update
ken chase
>These photos are posted for all on this board who have helped enormously with their generous answers to my incessant questions,
You know who you are. Much thanks
Re: progress update
ken chase
>
Re: progress update
ken chase
>
Re: progress update
Carole in VA
>You're moving right along Ken! What is the wood in the last pic? Sure is pretty. What did you decide to do with the green peach piece?
Re: progress update
ken chase
>
Re: progress update
ken chase
>I intended to post a response sooner. Sorry. You were right I did get some cracks. It happened where the piece was turned a bit thinner than elsewhere. I dremeled a design where this happened and filled with some epoxy mixed with brass shavings. The mix obviously was imperfect and it didn't harden properly. No more epoxy tubes that dispense side by side. I've come to the conclusion they seldom flow in the proper proportion. I guess the thing to do if purchase epoxy that comes in separate bottles and carefully weigh out the two components and then mix together. I learn something new every day and that is what I love most about turning. Thanks for you interest and help.
Ken
Re: progress update
Ed Kelle
>I like this one a lot Ken. What kind of wood is this? Good job on all the pieces
Re: progress update
ken chase
>Thanks Ed. Forgot to mention it is mesquite.