Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Raw Deal from Grizzly

Posts

Raw Deal from Grizzly

#1

Raw Deal from Grizzly

Vicmarc.fan

>I know I should have listned to myself saying you get what you pay for. I have seen all the people complain about Grizzly quality yet I could't help myself,I orderded one of those Vicmarc look alike chucks. The chuck sent to me would not "self center". After I cut a spigot and mounted a piece of wood in the chuck you could see the wood moving up and down. I don't know if it was the insert or the jaws or do I care. I called Grizzly customer service and was told to return it with a copy of the postage and they would give me a full refund. My credit card statement came today and no refund from Grizzly. I called Grizzly again today and was told they could't find the chuck defective and charged a 10%restocking fee and couldn't refund the return postage. Turns out to be a he said you said deal and the customer is wrong and Grizzly's tech is right. It was noted by the tech that the merchandise was in new and resalable condition. Maybe I am wrong but it looks to me I paid postage both ways on a defective part and Grizzly still makes a 10% profit on the deal. Maybe more if they never credit my credit card. It's been three weeks since they took delivery of the return. Probly think $30.00 is not worth the trouble to make a big deal out of. Maybe I will cool down but I don't think so.

Ron

Re: Raw Deal from Grizzly

#2

Re: Raw Deal from Grizzly

Barry Turner

>RL, Always buy name-brand stuff. I do, and I've seldom been disappointed. If you do get a bad item from a reputable dealer, they will notmally take care of it to your satisfaction. A chuck is not a place to skimp on quality. Those China/Taiwanese look-a-likes usually look good, but seldom do they perform as well as the real thing.

You didn't lose $30, you paid $30 for a lesson. Most of my lessons have cost much more than that.

Barry

Re: Raw Deal from Grizzly

#3

Re: Raw Deal from Grizzly

tim mathis

>hi, very sorry to hear about this. i am almost ready to buy a 21'' bandsaw and they have one i am looing at . but this makes me think twice. this might have cost them $1500 +.

i hope you receive all your money back.

tim mathis

Re: Raw Deal from Grizzly

#4

Re: Raw Deal from Grizzly

Don Tewell

>It's nice to know. I was seriously considering one of the those 'look alike' chucks but think I'll just save my money and wait until I can afford a better one. Good look on getting reimbursed.

Re: Raw Deal from Grizzly

#5

Re: Raw Deal from Grizzly *LINK*

Jennifer@Indy.USA

>Ron, was it this one that you bought? It's $89.00. If it is I'm bummed becasue I was thinking of getting one :(

Jen


chuck???

Re: Raw Deal from Grizzly

#6

Re: Raw Deal from Grizzly

Bill Crommett

>For all of you who are bummed about Grizzly, let me give my testimonial: The knock-off chuck from Grizzly that I bought turned out to be just great The gears were not as smooth as the original Vick, but everything went togather right and outside of the slightly rougher gears it is just as good as the vick. I know I gambled, but this time I won, as did several others on this forum.

Re: Raw Deal from Grizzly

#7

Re: Raw Deal from Grizzly

JKJ in East TN

>Could the jaws have been assembled incorrectly? I've never seen the Grizzly chuck but if it's like some of the others, the numbered jaws have to be attached to the numbered slides (which also have to be assembled in the correct places.)

JKJ

Re: Raw Deal from Grizzly

#8

Re: Raw Deal from Grizzly

Don Henthorn

>Yup. I bought one and after giving it a shot of powdered graphite I couldn't ask for it to operate any smoother. Perfectly satisfied. By the way, I have heard as many complaints on this forum about Powermatic, Delta, Jet and other name brands as I have about Grizzly. In my book you have as much chance of getting what you paid for from Grizzly as you do from the name brands. Generally people brag about Grizzly service. If I were you, Vicmark Fan, I would call Grizzly customer service and ask to speak to a supervisor.

Re: Raw Deal from Grizzly

#9

Re: Raw Deal from Grizzly

Kevin Gerstenecker

>Grizzly IS a reputable dealer. I don't have the chuck, but I do have several larger tools, and I couldn't be happier with the product or service. When I had to deal with customer service on a couple of occasions, it was handled quickly, professionally and the results were as good or better than any other vendor I have dealt with. As others have stated, their chucks are fine, and I think I would ask for a replacement chuck and give it another try. After all, if you look hard enough, you will find someone that has gotten a lemon in any tool or accessory. Good luck with the outcome though, and I know what you mean.............the chuck should be right, or replaced or refunded in full. Call and talk to a supervisor in Tech. support...........they will fix ya up!

Re: Raw Deal from Grizzly

#10

Keith Tompkins

Re: Raw Deal from Grizzly

Keith Tompkins

>AND....the allen screws lightly tightened, then the jaws tightened until they touch, then a final tightening of the allen screws.

Re: Raw Deal from Grizzly

#11

Re: Raw Deal from Grizzly

Jill

>I purchased this chuck and love it. Use it daily without any problems. I am a new turner so I took it to my turning buddies and he liked it as well. I would ask Grizzly to send you another one at no cost for postage and a return on the postage you paid. Check with your credit card company you should get your credit back because you did not accept this product because of it being damaged.

Re: Raw Deal from Grizzly

#12

Re: Raw Deal from Grizzly

George Van in WI

>Never saw this suggestion Kieth, I will have to adopt this procedure with my Oneway jaws also. Makes a lot of sense.

Re: Raw Deal from Grizzly

#13

Re: Raw Deal from Grizzly

Ken George

>I agree, call Grizzly and speak to a customer service supervisor. I also have the Grizzly chuck and it is very close to as good as my Vic and I use it all the time. I have purchased Grizzly tools and accessories for a few years now and although they aren't the best quality as a part time turner they have served me well. And, when I have had issues I have found Grizzly custmer service to be right up there with the best.

Re: Raw Deal from Grizzly

#14

Re: Raw Deal from Grizzly

John Lucas

>I think I purchased one of the first ones and in actual use I can't tell the difference between it and my Vicmarc's The sloppiness in the jaws is betweeen the helical drives and that doesn't seem to affect the grip or the accuracy. I've turned over a dozen of the two part ornaments with that chuck and everything lines up just fine.

I believe I would try to talk to someone higher up the chain, be polite, explain the situation calmly and I'll bet you'll get it resolved.

Re: Raw Deal from Grizzly

#15

Re: Raw Deal from Grizzly

Carole in VA

>Teknatool is very specific about doing this when mounting jaws on their chucks.

Re: Raw Deal from Grizzly

#16

Re: Raw Deal from Grizzly

Vicmarc.fan

>Hi Jen,

Yes this is the chuck. I have read other posts that the chuck was acceptable? In my case it wasn't. Im just hot that I couldn't get any satisfaction from the "suits". Definately my last purchase from Grizzly.

Ron

Re: Raw Deal from Grizzly

#17

Re: Raw Deal from Grizzly

Charles Bjorgen

>I've wondered about Teknatool's very specific setup instructions on their Midi Precision chuck. After having a bad experience with the now defunct Compac chuck--I returned it and bought another Oneway Talon--I took a chance and bought the Midi chuck for use with my Mercury lathe. Following the Teknatool instructions for setup just as Keith stated, the Midi has been a good, although limited, performer.

Re: Raw Deal from Grizzly

#18

Re: Raw Deal from Grizzly

Barry Turner

>I have a friend who has a Griz' 10" tablesaw, an 8" long-bed jointer and a 3 HP shaper (2 of them), and loves every tool. They do have some good stuff, just not sure their chucks are.

Re: Raw Deal from Grizzly

#19

Re: Raw Deal from Grizzly

Barry Turner

>If I wanted a small, inexpensive chuck, I might spring for the Nova Midi. I have a Compac and despite the negative review, I like mine, it just is too limited in capacity. I also have a SuperNova which I like very much.

Back when I was doing general woodworking, I was buying a few Jorgensen clamps along as I could afford them. They're expensive, but you can never have too many clamps. I found some Chinese lookalikes for 1/3 the price and bought a bunch of them. They looked every bit as well-made as the Jorgansens. But, they didn't work worth a damn. The action of the screws was very rough. They hung on my shop wall for a few years while I used the few Jorgensens I had. After trying to use the clamps several times, I finally threw every one of those danged junky things away (when my wife wasn't looking). I don't buy much China stuff anymore.......it's hard not to, there's so much......but, I learned my lesson.

Re: Raw Deal from Grizzly

#20

Re: Raw Deal from Grizzly

Barry Turner

>Even after following this procedure with my SuperNova, my jaws were still mismatched. I bought it from KMS Tools, but they took care of the problem at no cost to me. I didn't even have to return the defective jaws.

Re: Raw Deal from Grizzly

#21

Re: Raw Deal from Grizzly

Gary Ratajczak

>Just purchased a few weeks ago. I was a little nervous from the reviews, but was at the store and said what the heck. Operation is very smooth. No issues with my copy at all. As mentioned, I would ask for a replacement.

Re: Raw Deal from Grizzly

#22

It's the policy, not the chuck

Tony Shaftel

>As someone pointed out, you can get a defective item from virtually any vendor. How they handle it is the issue. Grizzly's upfront policy is to reserve the right to inspect the merchandise to determine whether or not you were 'justified' in returning it; if not, you pay postage both ways and the 10% restocking fee. They also used to start your warranty period when you ordered an item, not when you received it. I don't know if this is still their policy.

In my experience such practices are often used by low-margin, second- or third-tier online vendors, such as most of the online outfits I buy cheap computer parts from, to limit their exposure by sharing more of the risk to the buyer (who must then beware).

The top online and catalog outfits do not ding you for returning anything (within reason, I assume, I've never worn a shirt for six months and then tried returning it). Not even if you just change your mind and decide you don't want the item. If there's nothing wrong with the item you probably pay shipping both ways. But if there's something wrong, or the item is clearly not what as expected, you may pay one-way at most. Never a restocking fee, in my experience.

I've even had one place pay for return shipping and then refund the full price plus original shipping, when I bought bandsaw blades too soon for a new bandsaw, then bought a different saw that required different length blades. That was Lee Valley, by the way. I told them I was quite willing to pay the shipping both ways but they refunded it nevertheless. Needless to say, I am loyal to a fault when it comes to Lee Valley, and always look there first for any woodworking items.

Whenever I consider buying an expensive Grizzly item, their return policy jumps right into my face as a reason to buy elsewhere.

I think Grizzly has some pretty good stuff and is dedicated to improving their reputation and position in the marketplace. That being the case, I believe they are doing themselves a disservice with their current return policy.

Re: Raw Deal from Grizzly

#23

jaw mismatch

JKJ in East TN

>>Even after following this procedure

>with my SuperNova, my jaws were

>still mismatched.

Out of ten or so SuperNova jaws, one set was bad. It appears they machine the shape from a solid piece of metal, then cut the piece into four jaws. On the bad set one of the four jaws was accidentally mixed up with one from another set. It was impossible to get the set to close properly. I'd purchased the jaws from Woodcraft who replaced them immediately.

I had another SuperNova chuck that was binding and difficult to adjust. Woodcraft also replaced that one and the replacement was perfect.

JKJ

Re: Raw Deal from Grizzly

#24

Re: It's the policy, not the chuck

Vicmarc.fan

>You hit the nail on the head. It is Grizzlys' return policy that upset me. I did talk to a customer service supervisor. He left no doubt in my mind that I would NOT be refunded the full purchase price or return postage. Thank goodness there are other tool sellers who stand behind what they sell.

Ron

Re: Raw Deal from Grizzly

#25

Keith Tompkins

Re: It's the policy, not the chuck

Keith Tompkins

>Would they be willing to send a replacement?