Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Anyone use an Axminster Chuck? *LINK*

Posts

Anyone use an Axminster Chuck? *LINK*

#1

Anyone use an Axminster Chuck? *LINK*

Craig Daymon

>Craft Supplies sell a couple of the chucks from Axminster. They look well made and seem to go for just a little less than OneWay or Vicmark. Also, their smaller chuck (4") uses a key instead of those lousy jimmy bars. I'm wondering how the 4" compares to a Talon. In addition, I THINK the jaw sets fit all the Axminster chucks, so upgrading is less costly.

I put the link to the 4" description from the Craft Supplies site below.

-Craig

P.S. The other nice thing about it is, for a smaller chuck, it is available for several spindle sizes. The link goes to the 1.25"x8tpi size I would need for my Powermatic.


Axminster 4" Chuck - Craft Supplies site

Re: Anyone use an Axminster Chuck? *LINK*

#2

Re: Anyone use an Axminster Chuck?

georgetroy

>I have the Heavy duty Axminster 4 Jaw, it's a great chuck. You have a wide range of options. However on the Key chuck I think some of the options would be to heavy for the body. This chuck should serve just a good as the Oneway Talon in my opinion. GT

Re: Anyone use an Axminster Chuck? *LINK*

#3

Re: Anyone use an Axminster Chuck?

Colin Spencer

>I have three Axminster chucks. Two of the older 4" 'woodturners' chucks and a newer 80cm (3.25") one. All the jaws are useable on the 4" chucks but not all fit the 80cm one. They are all operated by the same toothed chuck key and IMHO are very good at a very reasonable price. The jaws available in the UK are second to none and some I have only seen for the Axminster. Check out Axminsters web site for all that are available. I also have a versachuck and all the jaws fit on this as well. I have not used the Oneway so cannot comment on it. I am sure if you buy an Axminster you will be pleased with it.

Colin

Re: Anyone use an Axminster Chuck? *LINK*

#4

Re: Anyone use an Axminster Chuck?

Craig Daymon

>Thanks for the responses. I'll definitely put Axminster in front of the list for my next chuck. I have one of their live tail sets, but haven't put it to use just yet since the move. Hope to real soon.

-Craig