Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

***TURNING CONTEST*** *LINK*

Posts

***TURNING CONTEST*** *LINK*

#1

Ellis Walentine

***TURNING CONTEST*** *LINK*

Ellis Walentine

>Yes folks, you heard right. I'm pleased to make this preliminary announcement of a brand new turning competition, right here on WoodCentral.com, sponsored by Jet and Powermatic.

This turning contest -- the first in what I hope will be a long and exciting series of regular turning contests on different themes -- has a great (and fairly wide-open) contest called "Two Board Feet." The concept was the inspired idea of our contest coordinator, Betty Scarpino, the well known turner and instructor from Indiana. I gave her free rein to design a challenging contest for us, and she came up with a real winner. I hope everyone will enter. You could be a winner, too, and share in some of the prize awards being provided by our sponsor.

Click on the link below to go to the contest page. I will be adding permanent links to the contest from our home and contest pages, as well as a little reminder link in the message index page as time permits.

Good luck to you all!

Ellis Walentine, Host


Turning Contest #1: "Two Board Feet"

Re: ***TURNING CONTEST*** *LINK*

#2

Re: ***TURNING CONTEST***

Jennifer@Indy.USA

>Ellis,

The rules state that the contest is now open and will be closed on November 15th?

Typo?

Re: ***TURNING CONTEST*** *LINK*

#3

Another typo?

Thomas Skaggs, Foothills of Mount Level

>Looks like it says that winners will be announced by "No Later than December 15, 2005"? That's before the deadline.

Tommy

Re: ***TURNING CONTEST*** *LINK*

#4

Ellis Walentine

Buncha eagle eyes around here... :-)

Ellis Walentine

>We had originally hoped to launch this contest back in October with a November deadline. I forgot to change them to the new dates.

Where would a frazzled web lackey be without observant pals? Thanks, guys.

Ellis

Re: ***TURNING CONTEST*** *LINK*

#5

Re: Another ... ;-)

Ed in Leaside

>Thought they were cut and paste errors. I wonder who will be turning cabinets out of 288 sq in of lumber. ;-)

"Before you enter, we suggest you have the following information ready:

- your contact information (name,address, phone number and e-mail address)

- dimensions of your cabinet

- list of mat ..."

Ed

Re: ***TURNING CONTEST*** *LINK*

#6

Darn.....

Jim Shaver, Oakville Ontario

>......And I was about to start spinning a huge honking chunk of cabinet too!!

LOL!!

Take care,

Jim

Re: ***TURNING CONTEST*** *LINK*

#7

Re: ***TURNING CONTEST***

RussFairfield

>Ellis,

You define "eligibility" in the middle of the page, but don't mention it in the "Contest Rules". You will save yourself a lot of grief if you restate the eligibility again in the "Contest Rules". There are folks, like me, who don't read directions very well. I almost missed the fact that I am not eligible to enter this contest.

Re: ***TURNING CONTEST*** *LINK*

#8

Re: Buncha eagle eyes around here... :-)

Thomas Skaggs, Foothills of Mount Level

>Ellis,

Wouldn't it just be easier to not change a thing and proclaim the contest rigged? ;-)

Tommy

Re: ***TURNING CONTEST*** *LINK*

#9

Ellis Walentine

Good one. Thanks

Ellis Walentine

>Keep 'em coming. We'll get this right yet. :-)

Ellis

Re: ***TURNING CONTEST*** *LINK*

#10

Ellis Walentine

Thanks, Russ

Ellis Walentine

>I have made the change as requested, and I've included the 25% rule that we have used on previous contests. I think that is a fair cutoff point for pros, don't you?

Ellis

Re: ***TURNING CONTEST*** *LINK*

#11

Re: "6x2x12"

Mark Mandell - Gone Round In Jersey

>Don't equal 2 bored feetz.

|;-}}

Re: ***TURNING CONTEST*** *LINK*

#12

Re: wow

Moses Yoder in White Pigeon, MI

>First of all, I see there are actually people who frequent the turning forum. A revelation ;) Second of all, I think I would be elgible to enter this contest even though 100% of my income is made from woodworking; none of it is made from woodturning. Of course I am not much good at woodturning, so it is questionable if I would enter, and the chance of me winning is about as much as getting struck thrice by lightning, but the entry fee would go to a good cause I guess.

Re: ***TURNING CONTEST*** *LINK*

#13

Re: ***TURNING CONTEST***

Barry Irby

>I would enter, but 100% of my woodworking income has come from turning. I can't consider myself a professional woodworker though, because I still have to have a real job to support my turning habit. I could double my "turning" income if I could find a second person to buy another turning. I either have little talent or the public has no taste.

Great contest. I'm looking forward to seeing the entries. Might be better if you had divisions, like turned only, traditional, Carved, multi axis, segmented, gold plated, whatever. Going to be hard for the judges to equate what comes in. I don't envy them.

Try having a contest where the fee is $500 and the prize is $15. This crowd would enter anyway and WC could buy Ellis a Jet. Lathe that is.

Re: ***TURNING CONTEST*** *LINK*

#14

Multiple species?

Rob Ceraso

>Hi Ellis -

The rules don't specifically state whether or not the 2 board foot total has to be of the same wood species.

Rob

Re: ***TURNING CONTEST*** *LINK*

#15

Ellis Walentine

Holy moly, Irby

Ellis Walentine

>First, I agree with your assessment of the difficulty of judging this type of wide-open contest, but I'm deferring to Betty, who is so much more experienced with turning competitions than I.

FYI, I plan to offer several contests per year on different turning themes that will be much more tightly worded. I'm open to suggestions for good contest themes.

Ellis

Re: ***TURNING CONTEST*** *LINK*

#16

Ellis Walentine

Added verbiage...

Ellis Walentine

>Betty says you can use more than one species and/or piece of wood, as long as the total is under 2BF. I have added that language to the contest instructions.

Thanks.

Ellis